Canon RealIS SX80 Mark II User Manual page 8

CHAPTER 1 • Introduction
■ For LV Series
When using LV series, specify an IP address of the projector for discovery.
Note
Configure LV series with the following procedures.
1
From [Discovery setting] of the [Option] menu, select [LV series] to configure.
[Discovery settings] dialog will display.
2
Place a checkmark in [Enable LV series].
Remove a checkmark if it is not used for discovery.
3
Select the [IP address] tab and click the [New] button.
[Specify IP address] dialog will display.
8
- With LV series, you can not discover using broadcast addresses or IP
address ranges.
- With LV series, it is recommended to use a fixed IP address for the
projector. If DHCP is configured to automatically assign IP addresses, you
will need to reconfigure this software everytime the projector's IP address
changes.