Using The Projector List; Confirming The Status Of A Projector - Canon RealIS SX80 Mark II User Manual

215 Using the Crojector List
2.5.1

Confirming the Status of a Projector

Confirm detailed properties of a projector shown in the Projector list with the following
procedures.
1
Select a projector to confirm the properties from the Projector list, and select
[Projector information] from the [Projector] menu.
Properties dialog of the selected projector will display.
Projector name, location, status, lamp replacement, air filter cleaning and replacement
information are displayed in the [Projector information] tab. The value in [Lamp time
converted] is shown considering its duration. The sum of [Lamp time normal] and [Lamp
time quite mode] is the total lamp usage time.
Network settings information are displayed in the [Network information] tab. Click the IP
address beside "Web link" to display the projector's web settings dialog.
Note
-
-
-
You can also double-click the projector name in the Projector list to display
the Properties dialog.
The following network settings information may not display in the [Network
Information] tab with some products:
Subnet mask, Default gateway, MAC address.
Location may not display with some models.
CHAPTER 2 • Routine Operation
C7