Advertisement
Quick Links
DIY Kids Workbench
By Fix This Build That
Difficulty
Easy
This Kids Workbench is perfect for your little future woodworkers and DIYers. It is a fully functional workbench that can be
put the in shop to let your little tikes build along with you. Or set it up inside for the ultimate play workbench!
Page 1 of 12
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kreg DIY Kids Workbench
Summary of Contents for Kreg DIY Kids Workbench
- Page 1 DIY Kids Workbench By Fix This Build That Difficulty Easy This Kids Workbench is perfect for your little future woodworkers and DIYers. It is a fully functional workbench that can be put the in shop to let your little tikes build along with you. Or set it up inside for the ultimate play workbench!
- Page 2 Wood Project Clamp - 6" MDF , 1/2" Thick , Quarter Sheet Pegboard , 1/4" Thick , Quarter Sheet Board , 2x2 , 96" Kreg® Pocket-Hole Jig 720 Board , 1x4 , 96" Board , 1x1 , 96" Other Tools Hardware &...
- Page 3 Cut List & Parts Back Legs , 2"x2"x41-3/4" Front Legs , 2"x2"x23-1/4" Pegboard Stretchers , 2"x2"x27" Pegboard Cleats , 3/4"x3/4"x27" Pegboard Cleats , 3/4"x3/4"x13-1/2" Pegboard , 1/4"x15"x27" Side Rails , 3/4"x3-1/2"x13-1/2" Shelf Stretchers , 3/4"x3-1/2"x27" Top Front Stretcher , 3/4"x3-1/2"x27" Top Back Stretcher , 3/4"x3-1/2"x27-3/4"...
- Page 4 Directions Assemble Back Cut back legs, pegboard stretchers, pegboard cleats, and back shelf stretcher. Attach 2x2 pegboard stretchers with to the back legs with 2" pocket screws to form a 15"x27" opening for the pegboard. Attach the 1x4 back shelf stretcher 5-1/4" up from the bottom with 1-1/4"...
- Page 5 Assemble Front Build front assembly with 2 front legs and the top and shelf stretchers. Center stretchers on the width of the legs. Top stretcher should get vertical pocket holes to attach the top. Attach stretchers with 1-1/4" pocket screws. Page 5 of 12...
- Page 6 Attach Side Rails Attach side rails to the front assembly with 1-1/4" pocket screws. Center rails on the width of the legs. Page 6 of 12...
- Page 7 Connect Front and Back Assemblies Connect front and back assemblies with 1-1/4" pocket screws through the side rails into the back legs. Page 7 of 12...
- Page 8 Add Top Stretcher, Cleats, Pegboard Add back top stretcher. It should register on the back legs and be attached with 1-1/4" pocket screws to the side rails. Add vertical pocket holes to attach the top. Add shelf cleats to the lower stretchers and rails to support the shelf. Attach pegboard with 3/4"...
- Page 9 Page 9 of 12...
- Page 10 Add Top and Shelf Cut the top from 3/4" MDF and roundover the corners and edges. Attach with 1-1/4" pocket screws through the vertical pocket holes in the top stretchers and top side rails. Notch 3/8" square cutouts into the corners of the 1/2" MDF shelf. Drop shelf into opening and secure with brad nails if desired.
- Page 11 Page 11 of 12...
- Page 12 Visit FixThisBuildThat.com Visit FixThisBuildThat.com for more great projects, plans and tools. Page 12 of 12...
Need help?
Do you have a question about the DIY Kids Workbench and is the answer not in the manual?
Questions and answers