Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GreenTec LRS 2002
Summary of Contents for GreenTec LRS 2002
- Page 2 GreenTec LRS 2002 Quadsaw...
-
Page 3: Important Information
Should you find the information given in this book different to the machine it relates to please contact the “After Sales Department” for advice Merkurvej 25 DK 6000 Kolding Denmark Tlf: +45 75553644 Fax: +45 75554243 Email: info@greentec.eu http: www.greentec.eu GreenTec Machinery Limited 2016 GreenTec LRS 2002 Quadsaw... - Page 4 GreenTec LRS 2002 Quadsaw...
-
Page 5: Table Of Contents
Suggested Warning Signs Required ..........................25 Use of Warning Signs ...............................25 ..................................26 AFETY TICKERS STORAGE ................................... 27 NOISE MEASURING ................................27 SUPPLIER INFORMATION AND CE-DECLARATIONS ......................27 WARNINGS, BAN AND DIRECTIONS ........................... 28 DISASSEMBLE ..................................28 GREENTEC WARRANTY ..............................29 GreenTec LRS 2002 Quadsaw... -
Page 6: Introduction
You are welcome to visit our website www.greentec.eu - where the login via the dealer's access gives you the latest updates on instructional and part books on our entire product range. The password for dealer log-in: PUB- LISHER We hope, you will be pleased with your new Greentec machine. -
Page 7: Important
Please, fill out the following information. It is practical information that is useable when ordering spare parts. …………………………………………………… Serielnumber: …………………………………………………… Delivery date: …………………………………………………… Dealer name: …………………………………………………… Address: …………………………………………………… …………………………………………………… Tel. / e-mail GreenTec A/S Merkurvej 25 Dk-6000 Kolding Tel: +45 7555 3644 Fax: +45 7555 4243 E-mail: greentec@greentec.eu Http: www.greentec.eu GreenTec LRS 2002 Quadsaw... -
Page 8: General Information
General Information Read this manual before fitting or operating the machine or accessory. Whenever any doubt exists contact your local dealer or the GreenTec Service Department for assistance. Only use ‘Genuine GreenTec Parts’ on GreenTec machinery and equipment. DEFINITIONS: The following definitions apply throughout this manual;... -
Page 9: Ce Declaration Of Conformity
Adapted EEC directive EG Guideline 2006/42/EF, 89/392/EEC & 98/37/EC We, GreenTec A/S, Merkurvej 25, 6000 Kolding, hereby declare that in terms of its design, method of construction and our execution thereof, the item of machinery described below complies with the basic health and safety regulations of the respective EU Directives. -
Page 10: Vehicle / Tractor Preparation
– in the instance of Power Arm hedgecutters it must be remembered that the machines centre of gravity during work will be constantly moving and will differ from that during transport mode, therefore balance becomes critical. GreenTec LRS 2002 Quadsaw... -
Page 11: Factors That Affect Stability
GreenTec LRS 2002 Quadsaw... -
Page 12: Mounting The Quadsaw
Also separate, the Return hose must be led directly to the oil reservoir (max 15 bar) • Check for oil leak. • First time the machine is used, measure the blade rpm. LRS 2002 (3000 – 3200 rpm). Maintaining this speed is important for the best optimum performance. -
Page 13: Hose Connection
Market in GREEN OBS: Case drain pressure may never exceed return pressure All machines supplied by GreenTec have hose connections market with the following stickers: Attachment of the machine must be performed in a safe location on a firm level site. -
Page 14: Attachment To Armsystem Or Mounting Carrige
Can be attached to Arm-system with a clamp bracket. Nuts should be torqued 200 Nm. Spearhead Twiga & GreenTec HXF 2802, 3300 & 3302 are all specially designed to carry the Quadsaw. The HXF is a mounting carriage designed for attaching Quadsaws to Tractor loaders and Telehandlers. -
Page 15: Operation / Introduction
➢ Never use the machine to perform tasks it was not designed for. ➢ Always lower the machine to rest on the ground with blade protection guards fitted when the unit is parked up or not in use. GreenTec LRS 2002 Quadsaw... -
Page 16: Driving Recommendations
200153.0 under each sawblade to prevent sawblades bending. If the sawblades any- way blocks, then stop the saw, stop the carrier, take out the ignition key, pull the handbrake, take your safety goggles and gloves on and remove the jammed piece of wood. GreenTec LRS 2002 Quadsaw... -
Page 17: Maintenance
• Dismount the belt guard to clean the housing. • Inspect and if necessary adjust the belts. (See belt diagram here or under belt guard). • GreenTec A/S recommend changing all sawblade-axles after 1500 hours of work, because of the possibility of metal fatigue. -
Page 18: Oil Supply
➢ Check valve block, hoses and fittings for signs of leaks – retighten or replace seals if required. ➢ Bolts and bushes should be greased and retightened. Regrinding If sawblades are sent to regrinding, GreenTec offers a wooden box made for that purpose. Can contain four saw blades. GreenTec LRS 2002 Quadsaw... -
Page 19: Tensioning The Belts
➢ Adjust powerbelts if required. ➢ Re-check again with tool 200155.0 ➢ Remount the lid. Contact GreenTec A/S After Sales Department if you have any questions. We might help you with a piece of good advice. Belt diagram LRS 2002 Tool for belt tension control Part no. -
Page 20: Correct Belt Tension
1. Take the lid off; mounted behind the saw blades. 2. Check/adjust the short belt by the engine. 3. Check/Adjust the 2 long belts connected to the saw blades. 4. Measure the belt tension on the middle of the belts. See 5. Remount the lid. GreenTec LRS 2002 Quadsaw... -
Page 21: Technical Data And Description Of Working Tool
85 litres. Relief valve 150 bar e. g. Twiga 4-7000 PTO speed 540 PTO speed 540 e. g. Twiga MID PTO speed 540 PTO speed 540 e. g. Twiga PRO HP PTO speed 440 PTO speed 440 GreenTec LRS 2002 Quadsaw... -
Page 22: Safety
▲ Tractor overbalancing when machine arm is extended. ▲ Injection of high-pressure oil from hydraulic hoses or couplings. ▲ Machine overbalancing when freestanding (out of use). ▲ Road traffic accidents due to collision or debris on the road. GreenTec LRS 2002 Quadsaw... -
Page 23: Before Using This Machine
Operate the blades at a speed between 3000-3200 rpm (depending on model). Ensure that all warning labels are always visible and that they are not damaged, defaced or miss- ing. Follow the manufacturer’s instructions for attachment and removal of machine from the tractor. GreenTec LRS 2002 Quadsaw... -
Page 24: Never
Attempt any maintenance or adjustment without first disengaging the PTO, lowering the head to the ground, stopping the tractor engine and applying the tractor parking brake. Enter the working area of the machine (risk of injury!). GreenTec LRS 2002 Quadsaw... -
Page 25: Additional Safety Advice
No ad- vice given here can replace ‘good common sense’ and ‘total awareness’ at all times, but will go a long way towards the safe use of your GreenTec machine. GreenTec LRS 2002 Quadsaw... -
Page 26: Safety Stickers
Observe instruc- tions and safety rules when operating. Warning Warning Check all nuts and Do not remove / open guard when parts are ro- bolts are tight every 8 hours – retighten if tating. required. GreenTec LRS 2002 Quadsaw... -
Page 27: Storage
Remember: regular maintenance will greatly increase the life of the machine. Noise measuring Noise measuring has been made on the machine during normal working conditions at GreenTec A/S, Denmark, with a Elma 1350 noise measurer, type ICE 651 type II. -
Page 28: Warnings, Ban And Directions
Category Example of parts Rubber and plastic Hoses, plastic strip Technical components Pumps, motors, hydraulic hoses Pure metal Plates, pipes, guard Removal of the parts must be done according to national and EU legislation. GreenTec LRS 2002 Quadsaw... -
Page 29: Greentec Warranty
Greentec Warranty Conditions The Warranty Registration Form (green page) must be completed and returned to Greentec within 7 days of the date of sale This warranty does not cover defects arising from fair wear and tear, willful damage, negligence, misuse, abnormal working conditions, use in competition, failure to follow Greentec’s instructions (oral or written, including all instruc-... - Page 30 GreenTec LRS 2002 Quadsaw...
- Page 31 GreenTec LRS 2002 Quadsaw...
Need help?
Do you have a question about the LRS 2002 and is the answer not in the manual?
Questions and answers