Multi Carrier. (Always read the instruction manual carefully!) The following guide shows step-by-step instructions dedicated to Multi Carriers in the HXF series, with accompanying pictures and explanations divided into the following sections: Contents of this guide: Unpacking of Multi Carrier HXF-series: ..............
Carefully cut off the plastic. Be careful not to cut hoses, wires and not to scratch the paint. • All loose parts for the Multi Carrier and the attachment tool are packed down together with or bolted / tied to the transport pallet. GreenTec Merkurvej 25 DK-6000 Kolding Phone: +45 75 55 36 44 info@GreenTec.eu...
• Lock the front loader locking mechanism and lift the Multi Carrier from the transport pallet. Never walk under a machine or front loader without it being adequately supported! GreenTec Merkurvej 25 DK-6000 Kolding Phone: +45 75 55 36 44 info@GreenTec.eu...
(See the instruction manual for Multi Carrier: HFX-series) It must be ensured that all switches on the control box are in the off position before the power is connected! GreenTec Merkurvej 25 DK-6000 Kolding Phone: +45 75 55 36 44 info@GreenTec.eu...
Page 7
(See the instruction manual for equipped Multi Carrier and /or attachment tool) In the case of electro-hydraulic operation (HXF Tele-series), the two blind plugs are assembled to ensure the blinds are not contaminated. GreenTec Merkurvej 25 DK-6000 Kolding Phone: +45 75 55 36 44 info@GreenTec.eu...
(Marked above) (In the case of a Multi Carrier in the HXF Tele-series, movement is made via electro-hydraulic operation from the cab of the vehicle) GreenTec Merkurvej 25 DK-6000 Kolding Phone: +45 75 55 36 44 info@GreenTec.eu...
Page 9
Switch on operation. The middle switch turns the attachment tool on / off. The switch is pulled outwards and down for activation. (Child Safety Device) Activate hydraulic cylinder. GreenTec Merkurvej 25 DK-6000 Kolding Phone: +45 75 55 36 44 info@GreenTec.eu GreenTec.eu...
5. Finishing remarks: The GreenTec Multi Carrier HXF-series is now ready to be fitted with an attachment tool. ALWAYS use the attachment tool’s instruction manual to create an overview of installation, safety, use, adjustment, maintenance etc. It is hereby important that the operator is given both an instruction manual...
Need help?
Do you have a question about the HXF Series and is the answer not in the manual?
Questions and answers