User Guide
THE MUSE WALL LIGHT
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
PREPARATION
Please read instructions thoroughly before installation
and keep them for future reference.
Improper assembly can undermine the safety and
longevity of the product.
IMPORTANT
The product is designed to work with the bulb provided.
Do not use alternative bulb as product will not work
effectively. For replacements, visit the Tala website or
contact us for assistance.
This light fitting must be connected to the supply earth.
If your lighting circuit does not have an earth, ask a
qualified electrician to provide an earth facility. This
fitting operates on 240V mains voltage. Please visit our
website to see our recommended dimmers. This product
is suitable for use in bathrooms and outdoor locations*.
WARNING
The Muse Wall Light is not suitable for recessed or
enclosed fixtures or environments, and should be
mounted upright and displayed as instructed.
Ensure all fixings are tightly sealed and do not allow
internal components and surfaces to be exposed to
water.
Always switch off electricity supply at the mains during
installation and maintenance. We recommend that the
fuse is withdrawn or the circuit breaker is switched off
whilst work is in progress. All fittings must be installed in
accordance with current Building Regulations and IEE
Wiring Regulations.
RECOMMENDED EQUIPMENT
- Small flat head screwdriver
- Wire strippers
- Insulation tape
Further equipment may be required for fixing to your
wall or ceiling.
UK-EU
IP44
220 - 240V
SKU - FB-MUSE-WL-CW-01-EU
SKU - FB-MUSE-WL-HB-01-EU
SKU - FB-MUSE-WL-PG-01-EU
SKU - FB-MUSE-WL-PR-01-EU
Need help?
Do you have a question about the THE MUSE and is the answer not in the manual?
Questions and answers