Tala The Muse User Manual

Download this manual

USER GUIDE

The Muse - Replacement Battery

Thoughtful lighting, responsibly designed in London.

Thank you for making the switch to Tala.

Discover the full Tala family at tala.co.uk

PREPARATION

Please read instructions thoroughly before installation

and keep them for future reference.

Improper assembly can undermine the safety and

longevity of the product.

Perform battery replacement on a clean surface free

from debris.

WARNING

Do not drop, damage or expose the battery pack to

water or fire.

Only use replacement batteries from Tala directly.

After assembly, ensure all fixings are tightly sealed and

do not allow internal components and surfaces to be

exposed to water.

AFTER-CARE

Used batteries should be recycled after use.

Tips to prolong the battery life:

- Once fully charged, please remove from charger

- Avoid letting The Muse reach 0% battery, when the low

battery indicator starts blinking, it should be recharged

- When not in use, store The Muse with between 25-

50% battery (1-2 indicators on)

- During charging, make sure The Muse is uncovered to

avoid over-heating

SKU - REP-MUSE-BTY-01

Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby

Tala Studios, 25B Vyner Street, London E2 9DG | hello@tala.co.uk

Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands

Tala North America, Inc. P.O. Box 89 1051, Port Washington Blvd. Port Washington, NY 11050, USA

Join the Community

Page 1 Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby Tala Studios, 25B Vyner Street, London E2 9DG | hello@tala.co.uk Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands Tala North America, Inc. P.O. Box 89 1051, Port Washington Blvd. Port Washington, NY 11050, USA...
Page 2 Lay the lamp down on a clean surface free of debris. Peel off the Rubber Pad on the base of The Muse. For better adhesion when replacing this pad, remove as much residue as possible. Do not use alcohol or solvents as these will damage the finish of the product.
Page 3 STEP 3 Identify the holding screws for the Battery Bracket. Loosen these with a screwdriver, but do not remove fully. STEP 4 Twist the Battery Bracket anti-clockwise to release from the holding screws. The Battery Bracket can now be removed with the Battery attached. STEP 5 The Battery can be detached from the main body by releasing the white...
Page 4 Replace the battery onto the Battery Bracket and re-connect the connectors as shown. Re-insert the Battery Bracket into The Muse body. Being careful to ensure all cables are out of the way. Do not trap any cables underneath the bracket.