Advertisement
Quick Links
User Guide
THE MUSE - REPLACEMENT BULB
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
PREPARATION
Please read instructions thoroughly before installation
and keep them for future reference.
Improper assembly can undermine the safety and
longevity of the product.
IMPORTANT
All packaging must be removed and bulb carefully
screwed in before turning on.
The product is designed to work with the Tala 12V LED
bulb provided. Do not use alternative bulb as product
will not work effectively. For replacements, visit the
Tala website or contact us for assistance.
Avoid turning on product in hot temperatures above 35ºC.
Doing so will reduce lumen output and bulb lifespan.
To reduce risk of scratches or marking, ensure bulb is
fully housed in the glass case unless changing the bulb.
WARNING
The Muse is not suitable for recessed or enclosed fixtures
or environments, and should be displayed as instructed.
Do not leave the product under direct sunlight while
switched on.
Ensure all fixings are tightly sealed and do not allow
internal components and surfaces to be exposed to water.
SKU - MUSE-A60-6W-2000-2800K-E27-MP-12V
Advertisement
Related Manuals for Tala MUSE
Summary of Contents for Tala MUSE
- Page 1 All packaging must be removed and bulb carefully screwed in before turning on. The product is designed to work with the Tala 12V LED bulb provided. Do not use alternative bulb as product will not work effectively. For replacements, visit the Tala website or contact us for assistance.
- Page 2 STEP 1 Release the two screws the lid with the provided Hex key and remove the handle STEP 2 Turn the fixture off by turning the dial anti-clockwise until there is an audible click. Lift off the lid and carefully unscrew the bulb inside by turning anti-clockwise.
- Page 3 STEP 3 Remove the bulb from inside the lamp and replace with the new bulb. Gently screw the new bulb clockwise to secure. STEP 4 Ensure the bulb is screwed in fully and contact is made between the base of the bulb and the housing. Be careful to align the bulb properly and do not over-tighten.
- Page 4 Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby Tala Studios, 25B Vyner Street, London E2 9DG | hello@tala.co.uk Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands Tala North America, Inc., 2 Research Place, Suite 300, Rockville, MD 20850, United States of America...