Advertisement
Quick Links
User Guide
THE MUSE
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
PREPARATION
Please read instructions thoroughly before installation
and keep them for future reference.
Improper assembly can undermine the safety and
longevity of the product.
IMPORTANT
All packaging must be removed and bulb carefully
screwed in before turning on.
The product is designed to work with the Tala 12V LED
bulb provided. Do not use alternative bulb as product
will not work effectively. For replacements, visit the
Tala website or contact us for assistance.
Avoid turning on product in hot temperatures above
35ºC. Doing so will reduce lumen output and bulb lifespan.
To reduce risk of scratches or marking, ensure bulb is
fully housed in the glass case unless changing the bulb.
WARNING
The Muse is not suitable for recessed or enclosed fixtures
or environments, and should be displayed as instructed.
Do not leave the product under direct sunlight while
switched on.
Ensure all fixings are tightly sealed and do not allow
internal components and surfaces to be exposed to water.
SKU – FB-MUSE-PBL-PG-01
SKU – FB-MUSE-PBL-PR-01
SKU – FB-MUSE-PBL-CW-01
SKU – FB-MUSE-PBL-HB-01
SKU – MUSE-PBL-SB-01
Scan me for more
technical help
IP44
E27 12V
USB TYPE-C 5V
Advertisement
Related Manuals for Tala THE MUSE
Summary of Contents for Tala THE MUSE
- Page 1 All packaging must be removed and bulb carefully screwed in before turning on. The product is designed to work with the Tala 12V LED bulb provided. Do not use alternative bulb as product will not work effectively. For replacements, visit the Tala website or contact us for assistance.
- Page 2 The Muse - Provided Components x1 The Muse luminaire x1 The Muse LED bulb in box x1 Flat-head screwdriver x1 USB Type-C Charging cable Handle 12V LED bulb Lampholder coil Dimmer dial Base Battery charge level button USB Type-C power input...
-
Page 3: Initial Setup
INITIAL SET UP STEP 1 Release the two screws on the lid with the provided screwdriver and remove the handle STEP 2 Lift off the lid and carefully remove all packing material from inside including the bulb box. - Page 4 STEP 3 Remove bulb from box and carefully screw into the lampholder coil by turning the bulb clockwise. Be careful to align the bulb properly and do not over-tighten. The glass can be removed again after initial installation for better access to bulb and lampholder coil.
- Page 5 STEP 5 Return the lid and handle to the original position and tighten screws to secure handle in place. STEP 6 To turn on, rotate the dial on the front of the lamp clockwise until the bulb lights up. Adjust the dimmer for your desired light output.
- Page 6 CHARGING THE MUSE OPTION 1: WIRED CHARGING Insert the provided USB Type-C charging cable into the input at the back of the luminaire base and plug into a USB Type-A adapter. For optimum charging, use the 0.5m charging cable provided and a 2-Amp USB Type-A adapter.
-
Page 7: Battery Level Indicator
- When not in use, store The Muse with 25-50% battery (indicators 1-2) - During charge, make sure The Muse is uncovered to avoid over-heating - Depending on the charger power output, The Muse may not always charge to 100% if the bulb is on at the same time The battery, bulb, and glass can all be easily replaced. -
Page 8: Care And Cleaning
Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850, USA NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.