Spectrum Industries 37388 Assembly Instructions

Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 0107624
Swivel VESA
mount
• Internal travel stops-provide 4-direction tilt, 4° left, 4° right, 16° up,
and 6° down (Specific monitor size, shape, and mounting location
will determine exact angles of tilt)
• Works with 75mm and 100mm VESA mounts
• On most flat panel monitors, it will be necessary to remove the standard
base that comes with the monitor to use the VESA mounting option.
1. Attach VESA mount to monitor
1. Choose attachment method. Horizontal Figure 1.1 or vertical (audience-side panel) Figure 1.2.
2. Attach the VESA mount (butterfly-shaped portion) to the back of your flat panel monitor with (4) M4 x 12mm PHM screws.
4mm screws not included. Note orientation of holes and slots with the top of the monitor in each method.
Horizontal Mounting on
worksurface
Provides display monitor mounting on the worksurface
(most monitors up to 22" diagonal)
Slots
Holes
(4) 036503
10-24 x 1.5"
PHMS
(4) M4 x 12mm
PHMS
(not included)
Swivel VESA
mount
Note: Slots toward top of monitor
maximize the tilt angles when used
on worksurface.
Figure 1.1
Swivel VESA mount for Shoutcaster
37388
10
min
Vertical Mounting
(60" Shoutcaster - 37420 only)
Provides display monitor mounting on audience-side
(most monitors up to 32" diagonal)
T o p
o f m
(4) M4 x 12mm
PHMS
(not included)
Swivel VESA
mount
3
/
"
16
o n i
t o r
Holes
Slots
Figure 1.2
0192406R1 Page 1 of 2