Thick Fabrics; Changing The Bar Tack Stitch Length; Changing The Bar Tack Stitch Width - Brother PC-850D Operation Manual

5

Thick fabrics

Changing the bar tack stitch length

3 1

Changing the bar tack stitch width

3 1
5. Start the machine while holding the end of the upper thread.
3
* The machine will sew a reinforcement stitch and stop
automatically after sewing is completed.
* If you touch the automatic thread cutting key prior to sewing,
the machine cuts both threads automatically after sewing is
completed.
* If the fabric will not feed (for instance, because it is too
thick), touch the "
the stitch length.
Place another piece of fabric or cardboard at the back as thick
as original. This sets the presser foot to the same height and
allows for easier feeding.
1 Presser foot
1
2 Cardboard
2
Touch the "
the stitch length.
1 "AUTO" length 0.4 mm (1/64")
2
2 "
" : Longer
3 " " : Shorter
* If the fabric will not feed (for instance, because it is too
thick), touch the "
the stitch length.
Touch the "
the stitch width.
1 "AUTO" width 2.0 mm (1/16")
2
2 "
": Wider
3 " ": Narrower
" stitch length setting key to increase
" and " " stitch length setting keys to adjust
" stitch length setting key to increase
" and " " stitch width setting keys to adjust
59