Sewing - Brother PC-850D Operation Manual

Sewing

5
1
2. Draw lines to join the marks as shown in the illustration.
1. Attach presser foot "N".
3
2. Place the fabric under the presser foot, pull the upper thread
out to the side and then lower the presser foot.
* If you used the pattern sheet to make positioning marks on
the fabric, place the fabric so that the marks are aligned with
the needle reference points in the presser foot and pull the
upper thread out to the side before lowering the presser
foot.
1 Needle hole reference line
3. Press the "START/STOP" button. Sewing will then start.
103