Editing Patterns On Embroidery Cards (Sold Separately) - Brother PC-850D Operation Manual

Editing Patterns on Embroidery Cards (sold separately)

Note
Only insert or remove embroidery cards when "
1 2
146
Example: Editing Patterns on the "Flower Card" (sold
separately)
1. Fully insert the embroidery card (with the card arrow , found
is on the front side, pointing in the direction of the slot) into
the card slot found on the side of your machine.
Note
Do not try to insert the card in any other direction than that
of the card arrow and do not try to forcefully insert the card
as either of these actions may cause damage.
2. Press the "Embroidery Edit" key followed by the "
key to display the pattern selection screen for the
embroidery card.
3. Select a pattern, then edit. (See pages 135 to 142 for details
on editing methods.)
1 Use this key to change size of pattern. (Refer page 140)
2 Use this key to rotate the pattern. (See page 140 for
details.)
3 Use this key to mirror image the pattern to the left or right.
(See page 144 for details.)
3
" is displayed.
"