Drum Units - Brother MFC-9010CN User Manual

j
Close the top cover of the machine.
k
Plug the machine's power cord back into
the AC power outlet first, and reconnect
all cables. Turn on the machine's power
switch.
Note
DO NOT turn off the machine's power
switch or open the top cover until the LCD
returns to the Ready mode.
IMPORTANT
While removing the drum unit, handle it
carefully because it may contain toner. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
Troubleshooting and routine maintenance

Drum units

Order No. DR-210CL 4 pc. Drum Set or single
drums DR-210CL-BK, DR-210CL-CMY
A new drum unit can print approximately
15,000 A4 or Letter size single-sided pages.
DR-210CL Drum Set contains 4 drum units
1 Black (DR-210CL-BK) and 3 Color
(DR-210CL-CMY). DR-210CL-BK contains
1 Black drum. DR-210CL-CMY contains
1 Color drum.
Drum wear and tear occurs due to use and
rotation of the drum and interaction with
paper, toner and other materials in the paper
path. In designing this product, Brother
decided to use the number of rotations of the
drum as a reasonable determinant of the
drum life. When a drum reaches the
factory-established rotation limit
corresponding to the rated page yield, the
product LCD display will advise you to
replace the applicable drum(s). The product
will continue to function; however, print
quality may not be optimal.
As the drums rotate in unison during the
various stages of operation (regardless of
whether toner is deposited on the page) and
because damage to a single drum unit is not
likely, you will need to replace all of the drums
at once (unless you have replaced an
individual drum [DR-210CL-BK for black and
DR-210CL-CMY for Color] for reasons other
than reaching its rated life). For your
convenience, Brother sells the drum units as
a set of four (DR-210CL).
C
C
91