Table of Contents
Advertisement
Custom: User-defined buttons
There are up to three Custom buttons on the Brother SmartUI
Control Center. You can set your own preferences and configuration
to fit your required application.
To configure a Custom Button right click on the button and then click
Configuration. The configuration window will appear. You have four
function choices Application, File, OCR and E-mail.
Application: This setting will link the Control Panel button to any
button which appears on the PaperPort Send to Bar. Please see the
PaperPort help file for more information regarding PaperPort
compatible applications.
File: This setting allows you to save a scanned image to any
directory on local or network hard disk. You can also select the file
format to be used.
OCR: Scanned original documents will be converted to editable text
files. If you have a third party OCR software package installed on
®
your PC you can select it. The default OCR software is TextBridge
which is built into PaperPort 8.0. You can also select the destination
word processor and file format for the editable text.
E-mail: Scanned images will be attached to an E-mail message. You
can choose which E-mail package to use if you have more than one
installed on your system. You can also select the file type for the
attachment.
Customizing a user-defined button
To configure a Custom button right-click on the button and then click
Configuration. Please follow the following guide lines for Custom
Button configuration.
1. Select the Scan Action
Select the type of scan by clicking the appropriate button.
®
USING THE WINDOWS
-BASED BROTHER SMARTUI CONTROL CENTER 5 - 29
Advertisement
Table of Contents
