Table of Contents
Advertisement
Scan to File
When you select Scan to File you can scan a black and white
original document and send it directly to a PC you designate on your
network. The file will be saved in the folder and file format that you
have configured in the Brother SmartUI on the designated PC. You
can change the Scan configuration.
®
(For Windows
®
(For Windows
button configuration on page 5-5 to 5-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Place the original document face down in the ADF.
2
Press
3
Press
to File .
Set
Press
.
4
Press
Set
Press
.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press
.
The MFC will start the scanning process.
Max. 25 clients can be connected to one MFC on a Network. For
example, if 30 clients try to connect at a time, 5 clients will not
be shown on the LCD.
9 - 9 NETWORK SCANNING
98/Me/2000: See Scan to File on page 4-8 to 4-9.)
XP: See Hardware Section: Changing the Scan to
Scan
(
).
or
to select Scan
or
to select a destination you want to send.
▲▼
Select
& Set
Scan to File
Advertisement
Table of Contents
