Origin Effects REVIVALDRIVE COMPACT Owner's Manual page 11

POST -DRIVE EQ controls (continued)
Use the tables below to help you set up the RevivalDrive Compact for the first time with a new guitar amplifier or
flat-response device. Working through Steps 1 and 2 allows you to "set-and-forget" the POST -DRIVE EQ controls
and move on to having fun dialling in your ideal tone with the main controls.
Step 1: Set POST -DRIVE EQ switch for the connected amp or device
AMPLIFIER OR CONNECTED DEVICE
Power amp/FX return & guitar speaker
Mixing desk & cabinet simulation
Recording interface & cabinet simulation
Bright, mid-scooped guitar amplifier
Dark or Mid-rich guitar amplifier
Step 2: Fine-tune the POST -DRIVE EQ with the ADJ control*
HOW IS THE PEDAL'S TONE?
Too bright or thin
Too dark or woolly
Just right!
*Please note: the ADJ control is not active when the POST-DRIVE EQ switch is in the P/AMP position.
RevivalDrive Compact
POST-DRIVE EQ SWITCH POSITION
P/AMP
EQ1
EQ2
TURN THE ADJ CONTROL...
Clockwise
Counterclockwise
Leave in this position and enjoy using the pedal!
11