Advertisement
Quick Links
Wedgetail Rails and Platform Fitting Instruction
To suit Mercedes Benz Vito LWB Van
Congratulations on the purchase of your Australian made Wedgetail Roof Rack product.
Please read and follow the instructions carefully to ensure correct fitment.
Contact us if any parts appear missing, incorrect, or damaged.
Clean the roof prior to fitting the roof racks.
ITEM
COMPONENT
1
Mercedes Benz Vito LWB Front Rails
Mercedes Benz Vito LWB Rear Rails
2
Wedgetail Pre-assemble Platform
3
4
Wedgetail Wind Deflector & Kits
WT-MVTL-2814_Fitting_Rev1 Updated
Updated: 3 Apr 2023
Tools Required:
•
Hex key (4 and 8 mm)
KIT CONTENTS
QTY
ITEM
2
5
2
6
1
7
1
COMPONENT
M6 x 12 mm Hex Sems
M10 x 20 Stainless Hex Bolt Sems
M10 Unistrut
COPYRIGHT TRADESMAN ROOF RACKS |WEDGETAILRACK.COM.AU
WT-MVTL-2814
QTY
10
8
8
Advertisement
Related Manuals for WEDGETAIL WT-MVTL-2814
Summary of Contents for WEDGETAIL WT-MVTL-2814
- Page 1 To suit Mercedes Benz Vito LWB Van WT-MVTL-2814 Congratulations on the purchase of your Australian made Wedgetail Roof Rack product. Please read and follow the instructions carefully to ensure correct fitment. Contact us if any parts appear missing, incorrect, or damaged.
- Page 2 Wedgetail Rails and Platform Fitting Instruction To suit Mercedes Benz Vito LWB Van WT-MVTL-2814 Removing Rubber mould • Remove 6 OEM plastic caps per sides in the roof channel shown to expose the factory mounting points. (Note: Except the plastic caps which are close to the windscreen) •...
- Page 3 Assemble the Wedgetail Platform to the rails • Place the Wedgetail Platform on the rails (Wind deflector mounting towards the front of vehicle), then spin the channel nuts 90 degree in the channel on the underside of the rack till they lock into the channels.
Need help?
Do you have a question about the WT-MVTL-2814 and is the answer not in the manual?
Questions and answers