Rails and platform to suit arb classic canopy (3 pages)
Summary of Contents for WEDGETAIL WT-T300-2213
Page 1
To suit Toyota Landcruiser 300 series 2021-Onward WT-T300-2213 Congratulations on the purchase of your Australian made Wedgetail Roof Rack product. Please read and follow the instructions carefully to ensure correct fitment. Contact us if any parts appear missing, incorrect, or damaged.
Page 2
Where necessary remove OEM cover plates to expose additional mounting points. If no factory rails: Remove 6x plastic cover plates to expose mountings. Align Wedgetail rail with OEM mounting points to determine Mounting lug position. WT-T300-2213_Fitting_Rev1 Updated COPYRIGHT TRADESMAN ROOF RACKS |WEDGETAILRACK.COM.AU...
Page 3
Place the neo rubber washers around the roof mounting holes as shown. Apply silicone on all the roof channel mounting holes to prevent any water ingress. Attach 6 Wedgetail rail mounting lugs and cover plates using 8mm hardware (as shown below).
Page 4
WT-T300-2213 Assemble the Wedgetail Platform to the rails Place the Wedgetail Platform on the rails (Wind deflector mounting towards the front of vehicle), then spin the channel nuts 90 degree in the channel on the underside of the rack till they lock into the channels. Do not tighten fully.
Need help?
Do you have a question about the WT-T300-2213 and is the answer not in the manual?
Questions and answers