Table of Contents
Advertisement
1
STEP
Inserting the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding broadcaster.
1 Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
≥You can insert one or two different CAMs with Smart Cards into this unit.
However, it will not operate properly when two CI Plus compatible CAMs are simultaneously inserted.
This unit's rear panel
AC IN
∫ PIN query
When you turn the unit on after inserting the card, depending on the card provider, a PIN may be demanded.
Enter the 4-digit code with the numbered buttons.
[Note]
≥Be sure to insert the CAM horizontally into the slot.
≥Do not insert the CAM and Smart Card upside down.
≥For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥Unplug the AC mains lead before you insert or remove the CAM with Smart Card. Remove it slowly.
RQT9434
16
CI (Common Interface) slot
1
VIDEO
2
L
COMMON INTERFACE
10BASE-T/
100BASE-TX
R
13V/18V
LNB
LNB
LNB
LNB
IN 1
IN 1
400mA max.
IN 2
IN 2
OPTICAL COAXIAL
AUDIO
COMPONENT
DIGITAL AUDIO OUT (PCM/BITSTREAM)
OUT
VIDEO OUT
Adjust the position marks.
CAM (Conditional Access Module)
Y
AV1
(TV)
P
B
VIDEO
RGB/S VIDEO
P
R
AV2
(EXT)
VIDEO
RGB/S VIDEO
OUT
Label facing upwards
Smart Card
Advertisement
Table of Contents
