Voice Commands - Motorola RIZR Z3 Manual

Z3.UG.VF.book Page 53 Thursday, October 26, 2006 2:07 PM
pressing the centre key s). To change what the
smart key does in the home screen, see page 79.

voice commands

You can use voice commands to tell your phone
what to do. To find the Voice Command Key refer
to page 2.
Note: This option is available only when the phone
language supports voice commands. Voice names
will be used when voice commands are not
supported.
1 Press and release the voice command key A
on the right side of the phone.
Your phone says "Say a command."
2 Say a voice command from the list (replace
555-1212 with a phone number, and replace
John Smith with a contact entry name):
voice commands
"Call 555-1212"
"Call John Smith"
"Send Email John Smith"
"Send Voice Note 555-1212"
voice commands
"Send Voice Note John Smith"
"Send Message 555-1212"
"Send Message John Smith"
"Lookup John Smith"
"PTT Connect John Smith"
"Go to Voicemail"
"Go to Camera"
"Go to Redial"
"Go to Received Calls"
"Check Status"
Your phone tells you its battery strength,
network signal strength, and whether its
coverage is normal or roaming.
"Check Battery"
"Check Signal"
"Check Network"
"Check My Phone Number"
basics 53