Searching For Other Devices - Motorola RAZR V3 Owner's Manual

This procedure turns Bluetooth power on and leaves it on
until you turn it off. When your phone's Bluetooth power is
on, your handsfree accessory can automatically
reconnect to the phone when you turn on the
accessory or move it within range of the phone.
Note: To extend battery life, use the above procedure
and set Bluetooth power to Off when not in use.

Searching for Other Devices

To connect your phone to a Bluetooth headset or
handsfree device:
Find the Feature
If Bluetooth power is turned off, your phone prompts you to
Temporarily Power On? the Bluetooth power setting. Press
YES (-) to proceed. Alternatively, set Power to On in the
Setup menu to turn Bluetooth power on and leave it on.
Your phone scans for and displays a list of device(s)
located within range of the phone.
Note: If your phone is already connected to a device, you
must disconnect from it to search for other devices.
To connect to a device, highlight the device name and
press SELECT (+).
The device may request permission to bond with your
phone. Select YES (-) and enter the correct PIN code to
create a secure connection with the device. When the
24
M > Settings > Connection
> Bluetooth Link
> Handsfree
> [Look For Devices]