Related Manuals for Caple RIF122
Summary of Contents for Caple RIF122
- Page 1 Instruction manual for integrated freezer Model code: RIF122 Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk...
- Page 2 European Safety Certificate Compliance Declaration The manufacturer assumes full responsibility for the compliance of products manufactured with relevant safety, health and environmental protection requirements set out in European Directives. Test reports are available for verification upon request. The manufacturer will present the quality certificate or manufacture license to a refrigerator dealer if so required.
- Page 3 Compression-type appliances which use flammable refrigerants shall be marked with the symbol “Caution: risk of fire”. Caution：risk of fire The height of the triangle in the symbol “Caution: risk of fire” shall be at least 15 mm. – WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
-
Page 4: Table Of Contents
Content Page Important! 1. Environmental Protection and Proper Disposal..2 It must be noted that refrigeration systems contain 2. Location..............2 refrigerants, which require specialized waste disposal. 3. Installation .............2-3 Contact your local waste disposal center for proper 4. Rating Plate..............3 disposal of an old appliance and contact your local 5. -
Page 5: Environmental Protection And Proper Disposal
3.Installation 1.Environmental Protection and Proper Disposal a) Remove all package materials. Package materials b) Remove items in the refrigerator. c) Make sure to remove film and tape on the cabinet and The applianc e is packag ed in a way to prev ent damag es the door. -
Page 6: Rating Plate
Write down the technical data for later reference to avoid Warning! the need for moving the refrigerator when such data are needed. After the refrigerator is positioned, allow it to stand still for at least 12 hours before star ting it up to ensure stable Model / Type refrigerant circulation and faultless operation. -
Page 7: Freezer Compartment
storage, select a medium setting. Turn temperature regulator counterclockwise to the lowest setting=lightest cooling; 4 Normally, when food requires a long period of storage, (Turn the regulator counterclockwise to the most will select a high setting. power off the refrigerator, compressor will stop) Turn temperature regulator counterclockwise to the NOTE! highest setting=coldest setting;... -
Page 8: Ice & Ice Cream Making
Making ice cubes: If a heat exchanger, i.e. condenser, is mounted on the back of refrigerator, dust and lint should be removed regularly to enable efficient heat dissipation and avoid · Add water to ice tray to 3/4 of its volume, place it at the excessive power consumption. -
Page 9: Problem Diagnosis
frequently; the evaporator surface may get damaged. Please check: · Wipe off defrosted water from time to time with sponge. · The refrigerator/freezer compartment should stand still for at least 2 hours after installation to stabilize the · Place a container of hot water (do not use boiling refrigerant circulation system. -
Page 10: During A Power Interruption
handle. 17. Warranty · Defrost and clean the freezer compartment (see “Defrosting”). A thick ice layer will impede refrigeration The terms and conditions as well as the period of warranty performance and increase power consumption. are indicated in the Letter of Warranty enclosed hereto. The dealer will brief you of the same upon purchase. - Page 11 Installation guide for built-in refrigeration Please carefully read this guide before installing the appliance.
- Page 13 RIF177 1773 - 1778 550 - 560 1774 - 1782 RIL122 1222 - 1224 550 - 560 1225 - 1233 RIF122 1222 - 1224 550 - 560 1225 - 1233 RIL88 873 - 875 550 - 560 874 - 882...
Need help?
Do you have a question about the RIF122 and is the answer not in the manual?
Questions and answers