Page 1
Instruction manual for integrated freezer Model code: RIF177 Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk...
Page 2
European Safety Certificate Compliance Declaration The manufacturer assumes full responsibility for the compliance of products manufactured with relevant safety, health and environmental protection requirements set out in European Directives. Test reports are available for verification upon request. The manufacturer will present the quality certificate or manufacture license to a refrigerator dealer if so required.
Page 3
Compression-type appliances which use flammable refrigerants shall be marked with the symbol “Caution: risk of fire”. Caution:risk of fire The height of the triangle in the symbol “Caution: risk of fire” shall be at least 15 mm. – WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Content Page Important! 1. Environmental Protection and Proper Disposal..2 It must be noted that a refrigeration system contains 2. Location..............2 refrigerants, which require specialised waste disposal. 3. Installation ...............2-3 Contact your local waste disposal center for proper 4. Rating Plate..............3 disposal of an old appliance and contact your local 5.
3.Installation 1.Environmental Protection and Proper Disposal a) Remove all packaging materials. Package materials b) Remove items in the refrigerator. c) Make sure to remove film and tape on the cabinet and The appliance is packaged in a way to prevent damages the door.
Warning! Write down the technical data for later reference to avoid the need for moving the refrigerator when such data is needed. After the refrigerator is positioned, allow it to stand still for at least 12 hours before starting it up to ensure stable Model / Type refrigerant circulation and faultless operation.
Turn temperature reg ulator counterclockwise to the lowest storage, select a medium setting. setting = lightest cooling; 4 Normally, when food requires a long period of stor age, (Turn the regulator counterclockwise to the most will select a high setting. power off the refrigerator, compressor will stop) Turn temperature regulator counter clockwise to the NOTE!
Making ice cubes: If a heat exchanger, i.e. condenser, is mounted on the back of refrigerator, dust and lint should be removed regularly to enable efficient heat dissipation and avoid · Add water to ice tray to 3/4 of its volume , place it at the excessive power consumption.
the evaporator surface may get damaged. frequently; Please check: · Wipe off defrosted water from time to time with a sponge. · The refriger ator/freezer co mpartment should stand still for at least 12 hours after installation to stabilize the ·...
15. Making A Service Call 1 Thermostat Servicing and repair should be conducted by qualified Caple engineers. The manufacturer is not 2 Drawer responsible for the risk of damages or injuries due to failure to comply with this provision and the warranty will be voided.
Page 11
Installation guide for built-in refrigeration Please carefully read this guide before installing the appliance.
Need help?
Do you have a question about the RIF177 and is the answer not in the manual?
Questions and answers