HOMCOM 838-264V01 Assembly Instruction Manual page 8

3. Fit long and short shelf support into
your desired position. Do not place
these supports into the top two holes of
the track (Pic 3). (There are position
recommendations below).
4. (GO TO STEP 5 IF YOU ARE NOT ASSEMBLING AS A WORK-
BENCH)
a) Fit two long shelf supports for the top of the workbench into the
top keyholes, then fit one centre brace to these shelf supports.
b) Use the remaining keyhole tracks, long and short shelf supports
and centre braces to assemble a straight or corner workbench,
following the same method as above.
c) Install MDF shelves.
d) Bolt has two halves of the workbench together if needed (nuts
and bolts not supplied).
-3-