Page 3
Basic Operations of Setting Menu ............2-1 (E) 2-2. Setup Menu ................... 2-2 (E) 2-2-1. Contents of Setup Menu ............2-2 (E) 2-3. Engineering Menu ................. 2-9 (E) 2-3-1. Contents of Engineering Menu ..........2-9 (E) 1 (E) CCU-900/900P IMM...
Page 4
Settings for the Signals of the Optional Boards ....3-12 (E) 4. Service Overview 4-1. Cleaning of Connector/Cable ..............4-1 (E) 4-2. Recommended Replacement Parts ............4-2 (E) 4-2-1. DC Fans (Rear Panel) ............4-2 (E) 2 (E) CCU-900/900P IMM...
Page 5
Sets the color of the character signal to be White Magenta/Cyan/Blue/ super-imposed on the color-bar signal. Red/Black Char BG Color White/Yellow/Green/ Sets the level of the character signal background White Magenta/Cyan/Blue/ to be super-imposed on the color-bar signal. Red/Black 2-7 (E) CCU-900/900P IMM...
Page 6
SDI AUDIO ON/OFF Selects whether audio signal is mixed with serial out. CF Shift Press the rotary encoder once to shift a color frame of the VBS output of PIX1/PIX2/WF1/WF2 of CCU-900/900P by one frame. 2-8 (E) CCU-900/900P IMM...
Page 7
Measurement point : PIX1/2 OUT connector of CCU 3. Select “DA1” from the engineering menu entry rear panel A = 100 ± 1 IRE (CCU-900) display. Specification : A = 700 ± 7 mV p-p (CCU-900P) * Engineering Menu * >DA1...
Page 8
4. The signals that can be allocated blink. Select the desired signal using the rotary encoder and press Enter. The signal to be allocated can be selected from D-RET1/2/3/4, A-RET1/2/3/4, AUX, PROMPTER and CAM. For the details, refer to Section 2-2, “Setup Menu”. 3-10 (E) CCU-900/900P IMM...
Page 9
3. Select “DUAL MODE” of the rotary encoder. Press the rotary encoder. Dual Camera Mode * Others * Primary Secondary Reference Analog Bars >Dual Mode Character FRONT PGM PGM1 PGM INPUT SERIAL SDI AUDIO CF Shift 3-11 (E) CCU-900/900P IMM...
Page 10
Generation (Frame Interpolation) SuperMotion Adjusting Setting When operating in the super motion mode, the CCU-900/ 900P standard output mode (for SERIAL OUTPUT 1/2/3, SERIAL MONITOR OUTPUT, PIX1/2 and WF1/2 3. Press [SuperMotion|Setting]. connectors of the rear panel) enables the normal speed The super motion setting menu appears.
Need help?
Do you have a question about the CCU-900 and is the answer not in the manual?
Questions and answers