Download Print this page
Toa RW-4800 Instruction Manual
Toa RW-4800 Instruction Manual

Toa RW-4800 Instruction Manual

Rom writer

Advertisement

Quick Links

ROM WRITER
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully
before use.
• Make sure to observe the instructions in this manual as
the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual
handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used
in this manual to prevent bodily injury and property
damage which could result from mishandling. Before
operating your product, read this manual first and
understand the safety symbols and messages so you are
thoroughly aware of the potential safety hazards.
WARNING
situation which, if mishandled, could result in death or
serious personal injury.
CAUTION
Indicates a potentially hazardous
situation which, if mishandled, could result in moderate
or minor personal injury, and/or property damage.
WARNING
When Installing the Unit
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
• Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects on the power cord, as doing so
may result in fire or electric shock.
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
Indicates a potentially hazardous
INSTRUCTION MANUAL
down and causing personal injury and/or property
damage.
• To prevent lightning strikes, install the unit at least
five meters away from a lightning rod, and yet
within the protective range (angle of 45°) of the
lightning conductor. Lightning strikes may cause a
fire, electric shock or personal injury.
• Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
When the Unit is in Use
• Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
· If you detect smoke or a strange smell coming
from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)
• Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
CAUTION
When Installing the Unit
• Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
• When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
RW-4800

Advertisement

loading
Need help?

Need help?

Do you have a question about the RW-4800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toa RW-4800

  • Page 1 AC outlet and WARNING Indicates a potentially hazardous contact your nearest TOA dealer. Make no further situation which, if mishandled, could result in death or attempt to operate the unit in this condition as this serious personal injury.
  • Page 2 Series Wireless Tuners or other TOA wireless microphone systems. 4. HANDLING PRECAUTIONS • Use the supplied cable when connecting the RW-4800 to a PC. Switch off the PC power and remove the AC-DC adapter from the RW-4800 when connecting or disconnecting the cable.
  • Page 3 PC and WT-4800. Step 5. Disconnect the cable between the PC serial port and WT-4800's remote port. 8.2. Connection of the RW-4800 to a PC, wireless microphone and WT-4810 Step 1. After switching off the PC power and removing RW-4800...
  • Page 4 Step 4. Connect the RW-4800's I/O port to equipment into which data is written using the supplied cable. Step 5. Switch on the power of equipment into which data is written. • For the wireless microphone, load a battery and set the power switch to ON position.