Download Print this page
Toa FV-208EV-AS Instruction Manual
Toa FV-208EV-AS Instruction Manual

Toa FV-208EV-AS Instruction Manual

Emergency public address system emergency message panel

Advertisement

Quick Links

EMERGENCY PUBLIC
ADDRESS SYSTEM
(EMERGENCY MESSAGE PANEL)
.................................................. 2
................................................... 2
.................................................... 3
.......................................... 4
................................................... 5
Thank you for purchasing TOA's Emergency Public Address System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
.......................... 2
..... 2
INSTRUCTION MANUAL
FV-208EV-AS
................................................ 6
......................................... 8
................................ 5
.............. 5
...................... 6
.......................... 7

Advertisement

loading
Need help?

Need help?

Do you have a question about the FV-208EV-AS and is the answer not in the manual?

Questions and answers

Summary of Contents for Toa FV-208EV-AS

  • Page 1: Table Of Contents

    Rear Panel ............ 3 8. SPECIFICATION 4. CONNECTIONS .......... 4 ......... 8 5. SETTINGS ........... 5 Thank you for purchasing TOA’s Emergency Public Address System. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
  • Page 2: General Description

    1. GENERAL DESCRIPTION The FV-208EV-AS Emergency Message Panel operates within the section of the FV-200 Series Emergency Public Address System. This panel is not required if the system is to be used solely for general-purpose public address application. It is possible to start and reset emergency broadcast through automatic or manual operation. The FV-208EV-AS consists with 8 pre-recorded emergency messages that is alert, evacuation, false, safe to stay, emergency standby, PA test, FA test, and siren.
  • Page 3: Rear Panel

    (Open voltage : 24 V DC: short-circuit current : connected to the FV-208EV-AS. This could reduce under 5mA; 2P terminal block). noise. 32. Stop Input Terminal Same function with STOP button at front.
  • Page 4: Connections

    4. CONNECTIONS Fire Alarm Panel FV-208EV-AS...
  • Page 5: Settings

    5. SETTINGS [ REAR VIEW ] USB cable Connect FV-208EV-AS (rear panel side) to PC/Notebook using USB cable. File config.ini will be found on EV20R folder, with this file we can set control output, delay time and playback interval. 5.1 Control I/O Setting Channel Control output can be customize with setting or edit Control I/O number by : * Open file config.ini with NOTEPAD, then set the Control I/O Value.
  • Page 6: Playback Interval Setting

    Broadcast repeated after each 5-seconds pause. 6. OPERATION A system that integrates the FV-208EV-AS allows emergency broadcast to be made automatically through connection to an automatic fire alarm system or manually via ALERT button of Fireman’s microphone in FV-208EV-AS unit.
  • Page 7: Dimensional Diagram

    7. DIMENSIONAL DIAGRAM Measurement unit : mm (inch)
  • Page 8: Specification

    8. SPECIFICATIONS FV-208EV-AS Power Source 24 V DC (operating range : 19.5 ~ 27 V) M3 Screw terminal Usable power supply unit : FV-200PS-AS Current Consumption 200 mA (rated) 100 mA (standby) Message Announcement 8 Messages : Alert, Evacuation, False, Safe Stay, Emer.Stby, PA Test, FA Test, Siren...