B Connecting To A Tv And An Amplifier With A Digital In Jack - Aiwa XD-DV520 Operating Instructions Manual

B Connecting to a TV and an amplifier with a Digital In jack

Use a commercially available 75 ohm coaxial cord when connecting the unit to an
supplied Audio/video cord is also available instead of a coaxial cord.
Audio/video cord (supplied)
yellow
to VIDEO OUT 1 or 2 jack (yellow)
AUDIO OUT VIDEO OUT S-VIDEO OUT
L 1
R 2
Set the setup menu correctly after connecting!
Set the "TV Aspect" and "Digital out" of the setup menu
according to the audio equipment and
unit as follows:
(See "CHANGING SETUP VALUES" on page 40 for details.)
Digital out
"Dolby Digital" to "PCM"
"DTS" to "Off"
TV Aspect
When your TV is a conventional-screen size
L-BOX or P-SCAN
When your TV is a wide-screen size TV:
16:9
to the video input jack (yellow)
yellow
COMPONENT
DIGITAL OUT
VIDEO OUT
Y
C
B
C
R
COAXIAL
to DIGITAL OUT COAXIAL jack
to the digital input jack
Front speaker (L)
Amplifier with a Digital In jack
TV connected to the
TV:
AV amplifier with a Digital In jack.
TV
Rear of the unit
Coaxial cord (not supplied)
Front speaker (R)
CONTINUE
The
to an AC outlet
13
ENGLISH
En