Bryant Legacy 677C Owner's Information Manual
  1. Manuals
  2. Brands
  3. Bryant Manuals
  4. Air Conditioner
  5. Legacy 677C
  6. Owner's information manual

Bryant Legacy 677C Owner's Information Manual

13.4 seer2 single phase 2-5 nominal tons (sizes 24-60) single packaged hybrid heat dual fuel system with puron (r-410a) refrigerant
Hide thumbs Also See for Legacy 677C:
Table of Contents

Advertisement

Quick Links

Download this manual
677C: Owner's Information Manual
677C
Legacy™ 13.4 SEER2 Single Phase
2-5 Nominal Tons (Sizes 24-60)
Single Packaged HYBRID HEAT® Dual Fuel System
With Puron® (R-410A) Refrigerant
For your convience, please record the model and serial numbers of your new equipment in the spaces
provided. This information, along with the installation data and dealer contact information, will be
helpful should your system require maintenance or service.
UNIT INFORMATION
Model #
Serial #
ACCESSORIES (List type of model #)
Our products are designed, tested and built in accordance with DOE standardized procedures; however, actual operating results and efficiencies may
vary based on manufacturing and supplier tolerances, equipment configuration, operating conditions and installation practices.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Owner's Information Manual
Fig. 1 – Unit 677C
NOTE TO EQUIPMENT OWNER:
NOTE TO INSTALLER:
This manual must be left with the eqipment owner.
INSTALLATION INFORMATION
Date Installed
DEALERSHIP CONTACT INFORMATION
Company Name
Address
Phone Number
Technician Name
1
A09033

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Legacy 677C and is the answer not in the manual?

Questions and answers

Related Manuals for Bryant Legacy 677C

Summary of Contents for Bryant Legacy 677C

  • Page 1 677C: Owner’s Information Manual 677C Legacy™ 13.4 SEER2 Single Phase 2-5 Nominal Tons (Sizes 24-60) Single Packaged HYBRID HEAT® Dual Fuel System With Puron® (R-410A) Refrigerant Owner’s Information Manual A09033 Fig. 1 – Unit 677C NOTE TO EQUIPMENT OWNER: For your convience, please record the model and serial numbers of your new equipment in the spaces provided.

  • Page 2: Cut Hazard

    677C: Owner’s Information Manual Safety Considerations WARNING Installation and servicing of this equipment can be hazardous due to mechanical and electrical components. Only trained and qualified FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD personnel should install, repair, or service this equipment. Failure to follow this warning could result in personal injury, death or Untrained personnel can perform basic maintenance functions such as property damage.

  • Page 3: Unit Introduction

    677C: Owner’s Information Manual WARNING FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD Failure to follow this hazard warning could result in personal injury, death and/or property damage. Do not turn off the electrical power to unit without first turning off the gas supply. Before attempting to start the gas heating section, familiarize yourself with all the procedures that must be followed.
  • Page 4 677C: Owner’s Information Manual NOTE: If the unit is being shut down because of a malfunction, call your dealer as soon as possible. Should overheating occur or the gas supply fail to shut off, shut off the external manual gas valve to the unit before shutting off the electrical supply.
  • Page 5 677C: Owner’s Information Manual MAIN STEP 1 STEP 2 STEP 3 STEP 5 STEP 4 STEP 6 STEP 7 MAIN STEP 8 STEP 9 STEP 10 A07662 Fig. 4 – To Start Unit Gas Heat Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
  • Page 6 677C: Owner’s Information Manual MAIN STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 A07663 Fig. 5 – To Shut Off Unit Gas Heat MAIN STEP 2 STEP 4 & 5 STEP 1 STEP 3 A09194 Fig. 6 – To Start Unit Electric Cooling Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

  • Page 7: Operating Your Unit

    677C: Owner’s Information Manual MAIN STEP 1 STEP 2 STEP 3 A07797 Fig. 7 – To Shut Off Unit Electric Cooling To start unit electric cooling: temperature is raised to the level you have selected. Of course, your system will run for longer periods to maintain a comfortable Refer to Fig.
  • Page 8 677C: Owner’s Information Manual For your safety, keep the unit area clear and free of combustible filter that was supplied originally by the installer. See Table NO TAG for materials, gasoline, and other flammable liquids and vapors. filter sizes supplied with accessory filter rack. Replacing or inspecting filters in units with To assure proper functioning of the unit, flow of condenser air must not be obstructed from reaching the unit.

  • Page 9: Electrical Controls And Wiring

    677C: Owner’s Information Manual Combustion Area and Vent System For proper and safe operation, the unit needs air for combustion and ventilation. The air openings, on the unit, the air openings to the area in which the unit is installed, and the spacing around the unit must not be blocked or obstructed.
  • Page 10 677C: Owner’s Information Manual Warranty Certificate suggestions over the phone, or save valuable time through knowledgeable preparation for the service call. Your unit has a limited warranty. Be sure to read the warranty carefully In Case of Trouble to determine the coverage for your unit. Before you call for service...

Table of Contents