Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ADJ TRI PHASE
Summary of Contents for ADJ TRI PHASE
- Page 1 TRI PHASE User Manual...
- Page 2 Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
-
Page 3: General Information
Please do not return this unit to your dealer without contacting customer support first. Introduction: The Tri Phase is a four channel, DMX intelligent LED fixture. The fixture can operate as a stand alone fixture or in a Master/Slave configuration. The Tri Phase has two operating modes: sound active and DMX Control. -
Page 4: Warranty & Returns
Power Cord Daisy Chain WARRANTY RETURNS The Tri Phase carries a 3 year (1095 day) limited warranty. Please fill out the enclosed warranty card to validate your purchase and warranty. You may also register your product online at www.adj.com. All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. -
Page 5: Safety Guidelines
SAFETY GUIDELINES For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You Attempt To Install Or Operate This Unit! • To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. •... -
Page 6: Dmx Set Up
Data Cable (DMX Cable) Requirements: The Tri Phase can be controlled via DMX-512 protocol. The Tri Phase is a four channel DMX unit. The DMX address is set electronically using the controls on the back panel of the unit. Your unit and your DMX controller require an approved DMX-512 110 Ohm data cable for data input and data output (see Figure 1). - Page 7 XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will reduce the risk of erratic behavior. 5-Pin XLR DMX Connectors. Some manufacturers use 5-pin XLR connectors for DATA transmis- sion in place of 3-pin.
-
Page 8: Installation
INSTALLATION The unit should be mounted using a mounting clamp (not provided), affixing the clamp to the mounting bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support at least 10 times the unit’s weight. -
Page 9: System Menu
SYSTEM MENU... - Page 10 SYSTEM MENU ADDR - DMX Address Setting. 1. Tap the either the MENU, UP, or DOWN buttons until “ADDR” is displayed, then press ENTER. 2. “1” will now be displayed and flashing. Press the UP or DOWN buttons to find your desired ad- dress.
-
Page 11: Operation
A DMX controller allows you to create unique pro- grams tailored to your individual needs. The Tri Phase is a four DMX channel fixture. See the DMX Traits section of this manual for de- •... -
Page 12: Dmx Traits
DMX TRAITS Channel Value Function Color Selection 0-16 17-33 Green 34-50 Blue 51-67 White 68-84 Red+Green 85-101 Red+Blue 102-118 Red+White 119-135 Green+Blue 136-152 Green+White 153-169 Red+Blue+White 170-186 Red+Green+Blue 187-203 Red+Green+White 204-220 Red+Blue+White 221-237 Green+Blue+White 238-255 Red+Green+Blue+White Rotation No Rotation 10-120 Clockwise, fast to slow 121-134 No Rotation... - Page 13 RGBW VALUES Color R Value G Value B Value W Value Green Blue White Red+Green Red+Blue Red+White Green+Blue Green+White Red+Blue+White Red+Green+Blue Red+Green+White Red+Blue+White Green+Blue+White Red+Green+Blue+White...
-
Page 14: Power Cord Daisy Chain
UC3 CONTROL Standby Blackout the unit. 1. Synchronous strobe Function 2. Two light strobe Rotation speed, 1-8 3. Sound control Mode Strobe (LED Off) Chase (LED On) POWER CORD DAISY CHAIN These fixtures can be linked together using the IEC input and output sockets. The maximum number of devices that can be linked together in this manner is 15 unit. -
Page 15: Troubleshooting
TROUBLE SHOOTING Trouble Shooting: Listed below are a few common problems that you may encounter, with potential solutions. No light output from the unit: • Be sure you have connected your unit to a wall outlet of the proper voltage. •... -
Page 16: Warranty
All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. -
Page 17: Specifications
ADJ Products, LLC 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-2650 / Fax: 323-725-6100 Web: www.adj.com / E-mail: info@adj.com A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade The Netherlands service@adjgroup.eu / www.adj.eu...
Need help?
Do you have a question about the TRI PHASE and is the answer not in the manual?
Questions and answers