Tune your TV to Channel 3 or 4 Connecting Your DTA100 Turn on your TV and ensure that it is tuned to either channel 3 or 4. On the back of the DTA100, ensure that the Ch 3/4 switch is set to the same Connect the DTA100 to your cable service.
Overview Congratulations on receiving a Motorola DTA100 Digital Transport Adapter. Connection Options The DTA100 transport adapter supports the RF out (coaxial) video/audio connection. This connection supports Standard-Deﬁ nition video and audio. DTA100 Quick Start Guide...
Connecting Your Device Connecting an SDTV Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable to the To TV connector on the DTA100 and the Cable / Antenna IN on the TV.
Connect a composite video cable from the Video Out connector on the VCR/ DVD Recorder to the Video In connector on the TV and a stereo audio cable from the Audio L / R Out connectors on the VCR/DVD Recorder to the Audio Left In and Audio Right In connector on the TV.
VCR / DVD Recorder to the VCR Video IN connector on the A/V Receiver and a stereo audio cable from the Audio L / R OUT connector on the VCR / DVD Recorder to the VCR Audio L / R IN connector on the A/V Receiver.
Problem Possible Solution The DTA100 will Verify whether the DTA100 is powered on by looking at the POWER icon on the front of the DTA100. If it is lit not power on green, the DTA100 is powered on. •...