Home Stereo Adapter
Make the following audio connections to your
stereo adapter (using the supplied cables):
Connect the Audio Out jacks on the stereo
adapter to unused Audio In jacks on your
home stereo system.
Connect the Audio In jacks on the stereo
adapter to unused Audio Out jacks (such as
Tape Out) on your home stereo system.
Note: If your home stereo does not support Line Out audio,
you may have to connect through the headphone jack with
the included RCA-to-headphone cable.
Note: To stream music from your phone (when equipped
with 2.5mm stereo output jack), use the included RCA-to-
2.5mm cable to connect to the adapter's Audio In jacks.
Get Connected in
5 Quick Steps
1 - 2 CONNECT
3 - 4 PAIR
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Follow the numbered steps to connect
and use a Motorola Bluetooth
Home Stereo Adapter.
Note: The DC800 Home Stereo Adapter is
a Class 1 Bluetooth device. Bluetooth
features and Bluetooth Class 1 power
levels are not allowed for outdoor operation
in France. To avoid unlawful interference
with radio signals, do not use the Bluetooth
features in France unless you are indoors.
Note: To operate with the DC800 Home
Stereo Adapter, your Bluetooth audio
device must support A2DP Profile
Note: To maintain compliance with RF
exposure guidelines, you must keep the
DC800 Home Stereo Adapter at least 20
centimeters (8 inches) away from any
Make the following power connection to
your stereo adapter:
Plug the included AC power supply into
the Power Jack on the stereo adapter.
Plug the other end of the AC power supply
into a wall outlet.