Adapter for iPod
Get connected in 2 quick steps.
SET UP STEREO DEVICE
To use your adapter to wirelessly stream music
from your iPod, you must first pair (link) it with
your bundled Bluetooth stereo device
(headphones, controller, home stereo adapter).
Follow these steps to set up your stereo device
to pair with your adapter:
Note: Make sure your adapter is not connected to your
iPod. If already connected, remove from your iPod.
Step A - PAIR STEREO DEVICE WITH PHONE
If using your stereo device to also make and
receive calls, pair (link) it with your Bluetooth
phone first. For steps on pairing with your
phone, see your stereo device's Quick Start
Step B -TURN OFF PAIRED DEVICES
Make sure any Bluetooth devices previously
paired with your stereo device (such as your
phone) are turned off.
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Your D650 Bluetooth Adapter for iPod allows
you to listen to music from your iPod wirelessly
using your bundled Bluetooth stereo device.
The adapter also allows your stereo device to
remain connected to your Bluetooth phone to
make and receive calls during wireless iPod
Take a moment before you get started to
familiarize yourself with your new adapter.
FOR PAIRING WITH ADAPTER
Step C - PUT STEREO DEVICE IN PAIRING
Place your stereo device into pairing
(discoverable) mode. For details on placing into
pairing mode, see your stereo device's Quick
For most Motorola stereo devices, the
indicator light is steadily lit in blue when in
pairing (discoverable) mode.