Using Your Acoustic Wave; Operating With One Remote Control - Bose Wave music system multi-CD changer Owner's Manual

AWMDC_OG.book Page 7 Monday, May 5, 2003 11:03 AM

Operating with one remote control

The remote control included with your Acoustic Wave
trol functions of both the multi-disc changer and your Acoustic Wave
fore, we suggest you put away the remote that came with your Acoustic Wave
system and use only this Acoustic Wave
Notice that this remote (Figure 5) has buttons to play the multi-disc changer, the Acoustic
Wave ®
Note: The Acoustic Wave
is connected to the changer, but cannot turn the component on or off or change its settings.
Figure 5
A new remote with
Turn Acoustic Wave
combined controls
music system on or off
Turn on the system and play
the appropriate sound source
Play/Pause for single CD player
(on top of the Acoustic Wave
music system)
Note: If the remote stops operating or its range seems reduced, it may be time to replace the
battery. However, be aware that a change in room lighting or other conditions, in addition to
battery age, can affect the operating range of an infrared remote control.
For instructions on battery replacement, refer to "Replacing the remote control battery" on
page 15.

Using Your Acoustic Wave

® multi-disc changer remote.
music system, and to select other external components connected to the changer.
®
multi-disc changer remote can select an auxiliary component that
®
Adjust volume
®
Play/Pause for multi-disc changer
® Multi-Disc Changer
® multi-disc changer allows you to con-
® music system. There-
®
music
Seek/Tune, when tuned
to FM or AM
Skip/Scan, when set
to CD or CD changer
Select:
PRESET radio station,
when tuned to FM or AM
CD (1 through 5) when
system is set to CD
changer
STOP for CD changer
and single CD player
Next disc selection
for multi-disc changer
7