Bosch VG4-161-CC0 Installation Manual page 19

VG4 Modular Camera Series
7.
8.
Bosch Security Systems, Inc.
Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en
If you are connecting alarm inputs and outputs, attach the supplied 4- and 6-pin Alarm
Connectors with flying lead wires to the appropriate incoming alarm wires.
PIN
1
2
3
4
PIN
1
2
3
4
5
6
Figure 2.3 Alarm and relay connectors
1 4-pin Alarm Connector
(P102)
Pin Description
1 Alarm Out 1
2 Alarm Out 2
3 Alarm Out 3‡
4 Alarm Ground
‡
The Alarm Out 3 (on the P102 connector) is the dedicated low pressure alarm for VG4 100 Series
AutoDome cameras.
If you are connecting supervised alarms and relays, attach the supplied 7-pin Relay
Connector to the appropriate incoming wires. See Figure 2.3, Page 19, above, for the wire
connections. See Section 6 Alarms and Relay Connections, page 98 for more details about
wiring alarms and relays.
Installation Manual
WHITE
BROWN
P102
ORANGE
GREEN
WHITE
BROWN
ORANGE
P103
GREEN
YELLOW
BLUE
2 6-pin Alarm In Connector
(P103)
Pin Description
1 Alarm In 3
2 Alarm In 4
3 Alarm In 5
4 Alarm In 6
5 Alarm In 7
6 Alarm Ground
1
2
3
4
5
6
7
P104
3 7-pin Relay Connector
(P104)
Pin Description
1 Normally Open
2 COM
3 Normally Closed
4 Earth Ground
5 Analog Alarm 1
6 Analog Alarm 2
7 Ground
F.01U.216.010 | 8.0 | 2011.02
19