Subscribe to Our Youtube Channel
Related Manuals for Koopers Duo
Summary of Contents for Koopers Duo
- Page 2 WARNING! Read the instructions carefully before use and keep for future reference. ISOFIX Insertion Aids ISOFIX Fastening Points(vehicle) Headrest Seat Cover Shoulder Pads Shoulder Straps Harness Buckle Crotch Pad Adjustment Button Adjustment Strap Belt Guidance 360° Rotation Adjuster Recline Handle Base Seat Reducer Buckle Tongues...
- Page 3 1. ISOFIX 2. ROTATION CLICK 3. SEAT ANGLE Fifth Level (Lying Level)
- Page 4 First Level Second Level Third Level Fourth Level 4. PUT THE CHILD IN...
- Page 5 5. STORE 5 POINT HARNESS 6. REARWARD FACING 0 13KG INSTALLATION CLICK 7. REARWARD FACING 0 18KG INSTALLATION...
- Page 6 8. FORWARD FACING 9 18KG INSTALLATION 9. FORWARD FACING 15 36KG INSTALLATION CLICK...
- Page 7 APPROVAL These instructions use the following symbols: Symbol Keyword Explanation DANGER! RISK of severe personal injury WARNING! RISK of minor personal injury RISK of material damage CAUTION! TIP! Useful notes CLICK The 946 CRS is exclusively intended to secure your child in your vehicle. Tested and approved according to ECE R44/04 Body Weight Installation method...
-
Page 8: Use In The Vehicle
Do not make any technical changes to the child safety seat. any relevant directions in your vehicle handbook, please ensure that the airbag is deactivated. DANGER! Use the 946 CRS exclusively for securing your child in your vehicle. It is in no way suitable for using as a seat or toy in the home. - Page 9 Press red release button (17) to open the harness buckle Press the 360° rotation adjuster (12) with thumb , rotate the seat shell. (7). Place child in child safety seat. Rotate the seat shell so it is facing either forwards or backwards, Bring both buckle tongues (16) together.
- Page 10 Pull out the vechile belt and lock into the vechile seat buckle, with the DANGER! diagonal belt bypassess the rear of the seat.Remain the diagonal belt in If your child tries to open the ISOFIX buttons or the red release button same place and the upper part goes through the gap between headrest stop immediately .
- Page 11 Make sure the top tether goes through the gap between headrest (3) 9. FORWARD FACING 15 36KG INSTALLATION and backrest. Store 5-point harness (Refer to page 17 )<store 5-point harness> Make sure the top tether strap is tightened up and make sure the top tether adjuster (20) indicator turn into green safety color.
-
Page 12: Care And Maintenance
• The shoulder pads can be removed and washed in lukewarm soapy water. TIP! The diagonal vehicle seat belt section must run diagonally backward. You can adjust the course of the belt • The plastic parts and the harnesses can be cleaned with soapy water. Do not use with your vehicle's ALR on both sides. - Page 13 SAFETY NOTES (as detailed in the vehicle handbook), depending on the category of the child seat and of the fixture. NOTICE 3. The mass group and the ISOFIX size class for which this device is intended is: D for Group 0+(0-13kg) and Group When using as Universal category (Group 0+ ), please (9-18kg).
- Page 14 the approval of the Type Approval Authority, or a danger occurs WARNING! if not following closely the installation instructions provided by the CRS manufacturer. The safest place for your baby is the rear of your car. However, if you need to install the seat in the front passenger HOT! The child seat should be kept away from sunlight if the seat seat, please ensure that the airbag is deactivated.
Need help?
Do you have a question about the Duo and is the answer not in the manual?
Questions and answers