Subscribe to Our Youtube Channel
Related Manuals for Koopers Arie+
Summary of Contents for Koopers Arie+
- Page 2 Notices 1. The child car seat must only be used in vehicles which are fitted with a three point seat belt system that has been approved by regulation ECE-16 or similar. 2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle hand book that the vehicle is capable of accepting a ‘Universal ’child restraint for this group.
- Page 3 EXTREME HAZARD NEVER USE IN FRONT PASSENGER SEATS EQUIPPED WITH AIRBAGS (SRS) THIS CAN INCLUDE REAR PASSENGER SEATS THAT ARE EQUIPPED WITH AIRBAGS* *Consult car manufacturer for suitability. Children’s bodies are not able to withstand the forces exerted on them by a deploying air-bag When Using the Child Car Seat Warning: Make sure that the child car seat is placed somewhere so that rigid items and plastic parts do not become trapped in doors or movable seat units when the seat is in everyday use.
- Page 4 Seatbelt Warning: NEVER use any load bearing contact points other than those described in these instructions or marked on the child car seat. Warning: Ensure that the lap section of the seatbelt or harness is worn low down, so that the pelvis is firmly engaged.
- Page 5 Contents Welcome Parts checklist Positioning the seat Installing the child car seat Removing the seat cover Replacing the seat cover Maintenance and cleaning Welcome Thank you for purchasing the child car seat. Please read these instructions carefully before use to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility.
- Page 6 Positioning the seat The child car seat can only be used with an automatic 3-point safety belt (A) and NOT with a 2-point lap belt (B). The child car seat can be secured in a forward-facing position in the rear seats of the vehicle by using the existing seat belts.
- Page 7 Installing with vehicle's seat belt 1. Place your child in the car seat and make sure they are sitting well back. 2. Thread the vehicle’s seat belt through the belt guide under the headrest and the belt guide under the armrest. 2.
- Page 8 Use the isofix system if your vehicle's seat has additional isofix anchor If your vehicle is equipped with Isofix anchor points, these should be used to obtain a more stable installation. These cars will have plastic elements that guide the seat’s Isofix anchors into their plastic guider correct positions.
- Page 9 Installing the child car seat REMOVING THE CAR SEAT. To remove the car seat, pull the grey button backwards on the Isofix anchors to release the car seat from vehicle’s Isofix anchor points. ATTENTION! If you have difficulty to release the Isofix connectors.
- Page 10 Installing the child car seat 3. Ensure that the diagonal belt lies gently on the child’s shoulder and the lap belt is worn over the hips Tighten the diagonal section of the seat belt by pulling it upwards until there is no slack and the belt holds the child firmly in place.
- Page 11 Removing the seat cover Removing the headrest covers by pulling the cover forward and off. Removing the wings by pulling the cover forward and off. Departing the backrest from the base by making the seat flat and detach the connection opint of the two parts. Removing the base by pulling the cover forward and off.
- Page 12 Replacing the seat cover Sliding the base cover onto each armrest, and then pull the cover over the front and down around the back of the base. Mounting the backrest by connecting opint of the two parts. Sliding the cover down, over each side impact system to secure the edge of cover is in the gap of the wings.
- Page 13 Maintenance and cleaning Storage 1) Store this child car seat in a safe place when not in use. 2) DO NOT place heavy objects on top of it. 3) Always store the child car seat in a dry environment. 4) DO NOT store the child car seat near a direct heat source such as a radiator. Covers 1) The seat cover is easily removable and should be handwashed with a pH neutral soap and cold water.
Need help?
Do you have a question about the Arie+ and is the answer not in the manual?
Questions and answers