Related Manuals for Koopers LucaFix
Summary of Contents for Koopers LucaFix
- Page 2 Thank you for trust to our company and products! 1.This is a“Universal”child restraint. It is approved to Regulation No.44, 04 series of amendments, for seneral use in vehicles and it will fit most, but not all, car seats. For parents: 2.
- Page 3 1. The steel components and plastic components of safety seat have to be fixed Table Of Contents by referring to manual, which ensure safety seat not be stuck by car seats and car doors. 2. Any straps holding the restraint to the vehicle should be tight, that any straps restraining the child should be adjusted to the child’s body, and that straps should not be twisted.
- Page 4 Know Your Car Seat (Front) Know Your Car Seat (Opposite) Rear cover ISOFIX release status ISOFIX access status Headrest setting handle Group I Cushion (Using Harness Guider for by baby from 9-12kg) Group II and III Headrest Central Adjuster Gear Indicator for Setting posture Top Tether Hook ISOFIX drawstring...
- Page 5 Selection Criteria for Baby Car Seat Car Seat Function Introduction This type baby car seat is applied to Group0+/I/II/III and the requirement for 1. The Function of Rotation weight is from 0 to 36kg. It is suitable for around 0 to 12 year-old children. The vehicle should have ISOFIX system that meet the requirement of ECE R14.
- Page 6 Group 0+I (0-18kg) Installation (Rearward facing placement) Attention Step 5: As shown in figure 5, insert the two ISOFIX connectors firmly into the ISOFIX fixed point in the 1. Only suitable use in the listed vehicles fitted with ISOFIX anchorages systems and approved car seat with a "clicking"...
- Page 7 Group 0+I (0-18kg) Installation (Rearward facing placement) 3. Harness Installation for Group 0+I Step 3: As shown in figure 3 and 4, pull out the top tether to go through the middle of car seat headrest and hook the tether anchorage behind (Refer to the User Manual from...
- Page 8 Group 0+I (0-18kg) Installation Group I (9-18kg) Installation (Rearward facing placement) (Forward facing placement) Attention Level 1 1. Only suitable use in the listed vehicles fitted with ISOFIX anchorages systems and approved to ECE Regulation No. 14. Level 2 2. The installation for Group I is forward facing and is applied to children from 9 to 18kg. 3.
- Page 9 Group I (9-18kg) Installation (Forward facing placement) Step 5: As shown in figure 5, before insert the two ISOFIX connectors into the ISOFIX fixed Step 3: As shown in point, ISOFIX indication window is red. figure 3 and 4, pull out the top tether to go through the middle of car seat headrest and...
- Page 10 Group I (9-18kg) Installation (Forward facing placement) 3. Harness Installation for Group I Methods to use harness buckle: guide the two buckle latches together and engage them before putting them into the harness buckle with a click nose. Pull the buckle latches to check whether it is locked well.
- Page 11 Group I (9-18kg) Installation 5-Point Harness Removal (Forward facing placement) Step 1: As shown in figure 1, Step 2: As shown in figure 2, Step 3: As shown in figure 3, loose the top tether strap and press the central adjuster and tighten the top tether and put rotate the car seat to the 90 loose the shoulder belt.
- Page 12 Group II+III (15-36kg) Installation 5-Point Harness Removal and Using method Attention 1. There is only one position level for Group II+III and it is level 1. 2. The installation for Group II+III is forward facing and is applied to children from 15 to 36kg. 3.
- Page 13 Group II+III (15-36kg) Installation and Using method 2. SEMI-UNIVERSAL II+III (15-36kg): ISOFIT+3-POINT BELT Step 6: As shown in figure 6, insert the two ISOFIT connectors firmly into the ISOFIT fixed point in the car seat with a "clicking" noise. In the meantime, ISOFIT indication window will become green.
- Page 14 Removing the Cover Cleaning and Maintenance 1. Removing the cover of car body Regularly check all important parts for damage. Make sure that the mechanical components in particular are all in perfect working order. If there is damage about your child safety seat in the event of an accident, in this case the safety Removing the cover of car body: seat must be replaced.
Need help?
Do you have a question about the LucaFix and is the answer not in the manual?
Questions and answers
How to install back harness
To install the back harness on the Koopers LucaFix:
1. Press the Central Adjuster: Press the central adjuster and pull out the harness strap to release the shoulder belt.
2. Open the Harness Buckle: Press the red adjuster button to open the harness buckle.
3. Position the Shoulder Belts: Pull out both shoulder belts to both sides of the seat.
4. Secure the Child: Have the child sit on the seat, ensuring the lap belt restricts the pelvis position.
5. Adjust Shoulder Belts: Ensure the shoulder belts are positioned slightly above the child's shoulders.
For top-tether installation in rearward-facing mode:
- Pull out the top tether through the middle of the car seat headrest.
- Hook the tether to the anchorage point behind the seat (refer to the vehicle's user manual).
This answer is automatically generated