HOMCOM M2117-32 Instruction Manual page 7

: Press this button to turn the fireplace on. Press it again to turn it off. Once
the fireplace is turned off, the fan will continue to operate for 60 seconds
without heat.
: Press this button to toggle between the two temperature scales. The
corresponding Celsius (C) or Fahrenheit (F) LED will indicate the current
temperature scale setting.
: Press this button for the timer function. The LED screen will display the
options from 0H-8H, OH indicates that there is no set running time – the
heater will run continuously. The numbers 1H-8H represent the number of
hours that the heater will run before automatically shutting off.
:Press this button to change flame effect. Press again to decrease the
flame intensity.
There are six light intensity options: 6, 5, 4, 3, 2 and 1. Pressing the button
again will top the flame effect. Hold the button for three seconds to change
the flame color – there are three flame effect types available.
: Press the up or down button to set the temperature. When the desired
ambient temperature is reached, the heater will automatically stop
heating. When the ambient temperature drops by 2°C of the desired
temperature, the heating will resume.
6REMOTE CONTROL BATTERY REPLACEMENT
Replace with a CR2025 battery. To install the new battery, follow the diagram on the
back of the remote control.
6