How To Use; Care And Cleaning - Black & Decker Bug Zapper BZ115 Use And Care Book Manual

Outdoor insect eliminator
Table of Contents

Advertisement

Available languages

Available languages

BZ115Pub1000001641
5/20/05
1:32 PM

How to Use

Important: Please read instructions before using unit for the first time.
This weather-resistant unit is for outdoor use only.
1. Unpack unit.
Important: Remove the foam inside the bulb cover.
2. Unplug unit and turn upside down.
3. Remove the bulb cover by pressing its side tabs and
pull out (A).
Note: If you have difficulty getting it out, hold the
cover in the center then pull out.
4. Remove the foam inside the bulb cover by pushing
A
it out with your finger (B).
5. It is recommended to locate the unit away from
your house, patio, pool or wherever people gather
but in close proximity for optimal operation (C).
This will ensure the ultraviolet light attracts insects
away from you and toward the unit.
B
6. Place the unit on a stable, flat surface or use the
hanging hook.
Important: Hang or mount the unit at least 8 feet
above ground level. Do not mount it on the house, on
decks or near heat, gas, or other flammable materials.
7. Use an extension cord to plug in the unit into an
outdoor electric outlet.
C
REPLACING THE ULTRAVIOLET LIGHT BULB
The unit comes with a 15-watt "U-shaped" ultraviolet light bulb. It is
recommended to replace the ultraviolet light bulb once a year as its ability
to attract insects diminishes over time. To order replacement bulbs, please
call 1-800-738-0245 or visit your local retailer.
To Remove:
1. Unplug unit and turn upside down.
2. Remove the bulb cover by pressing its side tabs and
pull out (D).
Note: If you have difficulty getting it out, hold the
cover in the center then pull out.
3. Grasp the old bulb and pull it straight out (E).
D
Page 6
5
To Install:
1. Look straight down for the bulb socket and insert
the bulb making sure the prongs fit securely into the
socket (F).
2. To insert the bulb cover, while pressing its side tabs,
E
position the cover with side indents aligned over
unit's side tabs. Push it straight down until side
indents fall under unit's side tabs. Release the cover
(G).
3. Turn the unit upright and make sure the bulb cover
is securely in place.
F

Care and Cleaning

Product contains no user-serviceable parts, except for
the UV light bulb. Refer service to qualified service
personnel.
To prolong the life of the unit, clean it frequently
G
especially when you see a large number of dead
insects collected on the zapping grid.
1. Unplug the unit and let it cool before cleaning.
2. Clean the grid with an air blower or a hair dryer on cool setting.
3. Store the unit indoors if the temperature is below 40°F.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bug zapper bz15

Table of Contents