Download Table of Contents Print this page
Black & Decker GK1000 User Manual

Black & Decker GK1000 User Manual

Alligator lopper
Hide thumbs Also See for GK1000:

Advertisement

www.blackanddecker.com.au
www.blackanddecker.co.nz
GK1000
GK1050

Advertisement

loading

Related Manuals for Black & Decker GK1000

Summary of Contents for Black & Decker GK1000

  • Page 1 GK1000 www.blackanddecker.com.au www.blackanddecker.co.nz GK1050...
  • Page 6: Intended Use

    Intended use English 3. Personal safety Your Black+Decker Alligator Lopper has been designed a. Stay alert, watch what you are doing and use common for trimming the branches of trees, cutting fallen branches sense when operating a power tool. Do not use a and cutting small logs 25 mm to 100 mm in diameter while the operator is standing on the ground.
  • Page 7 e. Maintain power tools. Check for misalignment or Always wear suitable safety equipment such as non-skid binding of moving parts, breakage of parts and any safety shoes, hard hat, goggles, ear protection and gloves other condition that may affect the power tools when operating the tool.
  • Page 8 Check the chain tension after every 10 Contents minutes of use. Adjust back to a 1. Oil bottle clearance of 3 mm. 2. Spanner 3. User manual Oil the chain after every 10 minutes of 4. Alligator lopper use. The above is included as a minimum. Warning do not touch chain at the chip Overview ejection point (9).
  • Page 9 is normal and is nothing to be concerned about. spanner (2) provided and remove completely. Remove the chain access cover (12). Switching on and off Open the handles and pull back the top jaw (6). Warning! Never attempt to lock or fix a switch actuator in the Pull back chain bar (8) and then lift the saw chain (9) out of on position.
  • Page 10: Ec Declaration Of Conformity

    Technical data To clean the tool, use only mild soap and a damp cloth. Never let any liquid get inside the tool and never immerse GK1000 GK1050 Voltage any part of the tool into liquid. Power input Oiling Chain speed (No-load) Regularly oil the oiling points (15) as indicated in figure B.
  • Page 12 Australia & New Zealand Stanley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 90622936 05/2015...

This manual is also suitable for:

Gk1050Alligator gk1000-xeAlligator gk1050-xe