Intended Usage; Use And Maintenance Of The Pyrometer; Modifications Of The Device; Environmental Protection - KPM PROCESS SENSORS PSC-S55N Operation Manual

PSC-55 Pyrometer Series Operation Manual
C E
H A P T E R R R O R
. 1
F O U N D

Intended usage

Use and maintenance of the pyrometer

Modifications of the device

Environmental protection

! R
E F E R E N C E S O U R C E N O T
In this chapter
Intended usage ...................................................................................................... 4
Use and maintenance of the pyrometer ................................................................ 4
Modifications of the device .................................................................................. 4
Environmental protection ..................................................................................... 4
Laser operation ..................................................................................................... 5
This device must be used only for non-contact temperature measurement. If you use
the pyrometer not compliant with it intended design or description in this user manual,
it will cause loss of all warranty claims against the manufacturer.
Use of the pyrometer is restricted to qualified personnel which has got instructions
before initial operation and handling. Instructions should be given by a supervisor or
optionally by Process Sensors customer service.
The pyrometer must be operated only with an isolated safety extra-low voltage
(SELV) that poses no danger to health and life of the user. Please refer to chapter
Technical data and accessories.
It is strongly prohibited to do technical modifications of the device without permission
of the manufacturer. Contraventions absolve the manufacturer from liability for any
damages. It automatically causes loss of all warranty claims against the manufacturer.
The lens or its coating may contain harmful materials, which are without danger
following the intended usage. The unit may not be disposed of with normal waste, for
disposal send the device back to Process Sensors
Disposal (in accordance with RL2002/96/EC)
4