Installing Additional Memory - BenQ Joybook 3000 User Manual

Installing Additional Memory

Please contact BenQ distributor or customer service center, or check the module which can be used on the BenQ web site, before you upgrade or
replace memory. If you wish to upgrade memory, you can replace the existing 128 MB or 256 MB module with a higher-capacity one. The product
warranty as provided by BenQ does not cover any damage to the machine as a result of your own discretionary upgrade or memory replacement.
Therefore, it is recommended that you take your Joybook 3000 to the BenQ distributor or customer service center for the upgrade or memory
replacement.
Your Joybook 3000 comes with 128MB or 256MB of system memory as one DDR (Double Data Rate) 266 SDRAM SoDIMMs ( Small Outline Dual
Inline Memory Modules). Memory can be extended to up to 1 GB.
24 Installing Additional Memory
Memory
1.
Turn off the computer, and disconnect
the AC adapter. Turn the computer over.
Battery
2.
Take out the battery, and use a screw-
driver to remove the screws that secure the
memory subsystem cover. Open the cover.