Subscribe to Our Youtube Channel
Related Manuals for Draytek VigorSwitch PQ2300xb
Summary of Contents for Draytek VigorSwitch PQ2300xb
- Page 1 VigorSwitch PQ2300xb / Q2300x L2+ Managed Switch Quick Start Guide Version: 1.0 Firmware Version: V2.9.4 (For future update, please visit DrayTek web site) Date: September 25, 2024...
- Page 2 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected Copyrights by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks ...
- Page 3 EU Declaration of Conformity Hereby, DrayTek Corporation declares that the equipment type VigorSwitch is in compliance with EU EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/VigorSwitch%20Q2300x/Document/CE/...
-
Page 4: Regulatory Information
UK PSTI STATEMENT OF COMPLIANCE We, DrayTek Corp., office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole responsibility that the product The full text of the PSTI Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/UK/PSTI/... - Page 5 Web registration is preferred. You can register your Vigor switch via https://myvigor.draytek.com. Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all switches will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. https://www.draytek.com...
- Page 6 VigorSwitch PQ2300xb (with PoE) VigorSwitch Q2300x (without PoE) Rack Mount Kit (brackets) & Quick Start Console Cable Guide The type of the power cord depends on the country that the switch will be installed. UK-type Power Cord EU-type Power Cord...
- Page 7 Port 1 to 24 (PoE) Port 25 to 30 Port 1 to 24 (GbE RJ45) (SFP+) Status Explanation An alert for system failure due to overheating or On (Red) wrong voltage. Monitor The device is in normal condition and running normally.
- Page 8 The port is disconnected or the link is failed. The switch is in the master mode of stacking. The switch is in slave mode or provided the highest priority. It serves more than 2 stacking members as the "Secondary Master". 2 to F The switch is in the slave mode of stacking.
- Page 9 PQ2300xb: +54VDC/7.41A (Vin2) power failover (PoE power) Note The following limitation is suitable for VigorSwitch PQ2300xb Power Output -- IEEE 802.3af Max. 15.4W Output Supported IEEE 802.3at Max. 30W Output Supported IEEE 802.3bt Max. 90W Output Supported (for Port 1~8 only) PoE Power Budget –-...
- Page 10 Other PCs, servers and network devices can be connected to the switch using a standard ‘straight through’ twisted pair cable. Here, we take VigorSwitch PQ2300xb as an example. Use the Ethernet cable(s) to connect None-PoE devices to the Vigor switch. ...
- Page 11 After the bracket installation, the VigorSwitch’s chassis can be installed in a rack by using four screws for each side of the rack. Here, we take VigorSwitch PQ2300xb as an example.
- Page 12 In this section, we take VigorSwitch PQ2300xb as an example. Before using the switch, perform the following steps: 1. Set up a physical path between the configured the switch and a PC by a qualified UTP Cat. 5e cable with RJ-45 connector.
- Page 13 5. Next, a page will appear to guide you change the login password. You MUST change the login password before accessing the web user interface. Please click OK. 6. Please set a new password with the highest level of strength for network security.
- Page 14 This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover any software applications or programs.
Need help?
Do you have a question about the VigorSwitch PQ2300xb and is the answer not in the manual?
Questions and answers