Rockwell Automation Allen-Bradley ASEM 6300 Installation Instructions Manual
Rockwell Automation Allen-Bradley ASEM 6300 Installation Instructions Manual

Rockwell Automation Allen-Bradley ASEM 6300 Installation Instructions Manual

Remote video link receiver
Hide thumbs Also See for Allen-Bradley ASEM 6300:

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Allen-Bradley ASEM 6300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rockwell Automation Allen-Bradley ASEM 6300

  • Page 1: Table Of Contents

    Installation Instructions Original Instructions ASEM 6300 Remote Video Link Receiver Catalog Number 6300V-RVLDV-RX Topic Page Summary of Changes UL/cUL Mark Compliance European Union Directive and UKCA Compliance Prepare for Installation Installation Site Guidelines RVL Receiver Placement Required Equipment Unpack your RVL Receiver Attach the Mounting Kit Secure your RVL Receiver Connect your RVL Receiver...
  • Page 2 Indien de apparatuur wordt gebruikt op een wijze die niet is gespecificeerd door de fabrikant, dan bestaat het gevaar dat de beveiliging van de apparatuur niet goed werkt. Rockwell Automation Publication 6300V-IN004C-EN-P - May 2024...
  • Page 3: Ul/Cul Mark Compliance

    - Consider the placement of required components and the maximum length of the cables to connect your RVL receiver to other components. Your RVL receiver provides long-distance video connection up to 100 m (328 ft). Rockwell Automation Publication 6300V-IN004C-EN-P - May 2024...
  • Page 4: Corrected Figure 1, Approximate Dimensions: Bracket Mounting And  Figure 2, Approximate Dimensions: Din Rail Mounting Orientation

    View of Unit from Top View of Unit from Side (5.98) 46.40 (5.98) (1.83) (0.59) 68.50 68.50 (2.99) (1.30) (2.70) (2.70) 13.40 (0.53) 47.50 (1.87) View of Unit from Side (1.30) (3.70) 46.50 (1.83) Rockwell Automation Publication 6300V-IN004C-EN-P - May 2024...
  • Page 5: Rvl Receiver Placement

    • Drill and 4 mm drill bit • 2.5 mm hex screwdriver • #2 Phillips screwdriver • Wire stripper, cutter, and crimper tool • M4x20 stainless steel screws, quantity 4 • Cutting pliers • Safety glasses Rockwell Automation Publication 6300V-IN004C-EN-P - May 2024...
  • Page 6: Unpack Your Rvl Receiver

    Be sure the DIN rail hook is properly positioned as shown in the DIN rail hook profile in Figure Tighten the screws with a 2.5 mm hex screwdriver to a torque value of 1…1.2 N•m (8.85…10.62 ft•lb). to secure bracket(s) or DIN rail hook to your RVL receiver. Rockwell Automation Publication 6300V-IN004C-EN-P - May 2024...
  • Page 7: Secure Your Rvl Receiver

    Table 13. Turn on the main power switch or breaker. 14. Tighten the screws on top of the DC terminal block to secure the DC power wires to the torque value in Table Rockwell Automation Publication 6300V-IN004C-EN-P - May 2024...
  • Page 8: Install The Ground Wire

    Table 1 on page 4 for a description of each LED status indicator. Additional Resources This publication provides basic installation instructions. For more information, see the following Rockwell Automation publications at rok.auto/literature. Resource Description Provides detail on how to install, configure, operate, and troubleshoot the 6300V RVL receiver...

This manual is also suitable for:

Allen-bradley 6300v-rvldv-rx

Table of Contents