Belkin F5D9231-4 User Manual page 47

UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
setting WPa/WPa2-Personal (PsK)
Like WPA security, WPA2 is available in both WPA2-Personal (PSK) mode and WPA2-Enterprise (RADIUS) mode� Typically, WPA2-Personal (PSK) is
the mode that will be used in a home environment, while WPA2-Enterprise (RADIUS) is implemented in a business environment where an external
radius server distributes the network key to the clients automatically� Your Router supports WPA2-Personal (PSK)�
1� After you've set up your Router, go to the "Security" under
"Wireless" and select "WPA/WPA2-Personal (PSK)" from the
"Security Mode" drop-down menu�
2� For "Authentication", select "WPA-PSK", "WPA2-PSK", or "WPA-
PSK + WPA2-PSK"� This setting will have to be identical on the
wireless clients that you set up� "WPA-PSK + WPA2-PSK" mode
will allow the Router to support clients running either WPA or WPA2
security�
3� For "Encryption Technique", select "TKIP", "AES", or "TKIP+AES"�
This setting will have to be identical on the wireless clients that you
set up�
4� Enter your pre-shared key (PSK)� This can be from eight to 63
characters and can be letters, numbers, or symbols� This same
key must be used on all of the wireless clients that you set up� For
example, your PSK might be something like: "Smith family network
key"� Click "Apply Changes" to finish� You must now set all wireless
clients to match these settings�
G+ MIMO Wireless Router
1 2 3 4 5 6
IMPORTanT: Make sure your wireless computers are updated to work
with WPA2 and have the correct settings to get proper connection to
the Router�
45
7 8 9 10