Belkin F5D9231-4 User Manual page 28

alTeRnaTe seTUP MeTHOd
sections
table of contents
setting your Internet service Provider (IsP) Connection Type to dynamic IP
A dynamic connection type is the most common connection type found with cable modems� Setting the connection type to "dynamic" in many cases
is enough to complete the connection to your ISP� Some dynamic connection types may require a host name� You can enter your host name in the
space provided if you were assigned one� Your host name is assigned by your ISP� Some dynamic connections may require that you clone the MAC
address of the PC that was originally connected to the modem�
(2)
G+ MIMO Wireless Router
1 2 3
(1)
(3)
4 5 6
1� Host name (1)
This space is provided to enter a host name that needs to be visible to
your ISP� Enter your host name here and click "Apply Changes" (3)� If
your ISP did not assign you a host name, or you are not sure, leave this
blank�
2� Change Wan MaC address (2)
If your ISP requires a specific MAC address to connect to the service,
you can enter a specific MAC address or clone the current computer's
MAC address through this link�
26
7 8 9 10