Connecting And Configuring Your Router - Belkin F5D9231-4 User Manual

COnneCTInG and COnfIGURInG yOUR ROUTeR

sections
table of contents
Verify the contents of your box� you should have the following:
• Belkin G Wireless Router
+ MIMO
• RJ45 Ethernet Networking Cable
• Power Supply
•
Belkin Setup Assistant Software CD
• User Manual on the Setup Assistant CD
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port� Many modems have both an RJ45 Ethernet port and a USB
connection� If you have a modem with both Ethernet and USB, and are
using the USB connection at this time, you will be instructed to use the
RJ45 Ethernet port during the installation procedure� If your modem has
only a USB port, you can request a different type of modem from your
ISP, or you can, in some cases, purchase a modem that has an RJ45
Ethernet port on it�
ethernet Usb
G+ MIMO Wireless Router
1 2 3 4 5 6
setup assistant
Belkin has provided our Setup Assistant software to make installing your
Router a simple and easy task� You can use it to get your Router up and
running in minutes� The Setup Assistant requires that your computer be
connected directly to your Router and that the Internet connection is
active and working at the time of installation� If it is not, you must use
the "Alternate Setup Method" section of this User Manual to configure
your Router� Additionally, if you are using an operating system other than
Windows 2000, XP, or Vista, or Mac OS X v10�x, you must set up the
Router using the "Alternate Setup Method" section of this User Manual�
11
7 8 9 10