Service Created; Browsing The Web Or Using E-Mail; Software & Other Settings; Language - Archos PMA 400 User Manual

Service Created

Your service has now been created. The
next time you go to add a service, you
will see all the services that you have
previously created. Also, when you have
a network connection open, you can
click on the Network application and
then click the Current tab to see the
current quality of the data transmission
signals.

Browsing the Web or Using E-mail

Now that you have a connection service set up, you should use the Network
Connect icon in the status bar at the bottom right of the screen. The red X
on the icon means that you are not connected.
Click on it and then choose which service you would like to connect with.
In our example, we would choose Logan_Wifi. It will take a couple of
seconds and then show the connected network and Wifi Card icons. You
can now launch the Opera™ web browser or use your E-mail program.
When you are not using these programs, it is recommended that you close
the network connection.
This will reduce the energy consumed by the Wifi card and thus give you longer battery life. If one
of these applications says "Can't find DNS server", this is a sign that you have lost your WiFi
connection. Use the status bar icon to disconnect and then try reconnecting again.
16 Software & Other settings
16.1

Language

Use this to change the interface language of your PMA400.
16.2

Security

Use this if you would like to force a password entry when the device is turned on.
31